Newbie: Installing Traffic Shaping
Hello List!
My distribution is SuSE 7.3 Prof. I've successfully installed the iproute2 packet. If I enter some tc-rules the machine returns no errors, but the rules do not affect the bandwidth!
Does this mean that the kernel is not compiled with the necessary options? Where can I see, which options the kernel was compiled with (sorry, but I'm newbie)? I didn't change anything, it's a normal SuSE 7.3 distribution.
If I knew that the modules are working, I could go on trying to install some rules, or could anyone be so kind and post a simple rule that is slowing down my eth0 interface? I'd just like to see if the tc-command and the kernel is working...
Thanks in advance!!
Signature · 7 lines
Yours sincerely, Christian Meier mailto:[email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Christian Meier;
Does this mean that the kernel is not compiled with the necessary options? Where can I see, which options the kernel was compiled with (sorry, but I'm newbie)? I didn't change anything, it's a normal SuSE 7.3 distribution.
If it is a default SuSE kernel everything you should be already there. Nevertheless if you want to see the config of the kernel. Note that HTB is not there
zcat /proc/config.gz will show you the config options set. If you want to add things and then recompile the folowing command will make it as a kernel config file
make cloneconfig
You may want to have a look at http://susefaq.sf.net/sectionkernel.html
Signature · 8 lines
Togan Muftuoglu Unofficial SuSE FAQ Maintainer http://dinamizm.ath.cx _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Christian Meier
Hello List!
My distribution is SuSE 7.3 Prof. I've successfully installed the iproute2 packet. If I enter some tc-rules the machine returns no errors, but the rules do not affect the bandwidth!
If you have no errors, you have all the support in the kernel you need.
Quoted 4 lines
Does this mean that the kernel is not compiled with the necessary options? Where can I see, which options the kernel was compiled with (sorry, but I'm newbie)? I didn't change anything, it's a normal SuSE 7.3 distribution.
Maybe you can find a config file in the /boot directory.
Quoted 4 lines
If I knew that the modules are working, I could go on trying to install some rules, or could anyone be so kind and post a simple rule that is slowing down my eth0 interface? I'd just like to see if the tc-command and the kernel is working...
I have some scripts on www.docm.org. You can also try to add a tvb qdisc as root qdisc. This will limit all outgoing traffic.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thanks for your fast answers, Togan and Stef! My sample configuration works now.
Quoted 1 line
Note that HTB is not there
Well, then I'll have to learn howto patch a kernel, because it's too difficult without HTB.
Quoted 1 line
zcat
/proc/config.gzwill show you the config options set.
Thanks it works
Quoted 3 lines
If you want to add things and then recompile the folowing command will make it as a kernel config file
make cloneconfig
I'll try it.
Quoted 1 line
You may want to have a look at http://susefaq.sf.net/sectionkernel.html
Ok
If I'll have any further questions to htb, I'll ask you again ;-)...
Signature · 7 lines
Yours, sincerely Christian Meier mailto:[email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/