QoS for real-time data on ADSL
Hello,
I have an ADSL connection to ISP. Our config at the moment is 64k
upstream and 384 downstream. I would like to set up the upstream QoS polixy/shaping for allowing real-time protocols, in my case VoIP (RTP).
I would like to know what should you recommend to use (theoretical
solution possible based on experience :).
I tryed CBQ and allow RTP packets to have the required bandwidth,
but while the delay is the most important parameter for RTP, the quality was terrible (when I did full upload). Because of the required minimum delay, I set up a PRIO queuing where I did 3 bands (1st: RTP, 2nd:
intercative e.g. SSH, 3rd: bulk traffic). Now the quality is acceptable. (I put SFQ to those bands)
My question is: is it possible to make better configuration for
real-time protocols (upling with narrow bandwidth)?
Thanks in advance,
Thomas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/