Newbie
Hi !!
First sorry about my english.
I really wont to know where can I start with Traffic control and load balance. I have 2 links to internet and about 100 users. Could anybody tell me what can I read for start?? What papers ??? Thank you very much and sorry for disturb.
Best regards,
Diego
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Diego,
traffic control: http://www.docum.org/
http://www.lartc.org/
multiple links: http://lartc.org/howto/lartc.rpdb.multiple-links.html
http://plorf.net/linux-ip/html/adv-routing.htm#ADV-MULTI-INTERNET-OUTBOUND
Bon voyage,
-Martin
: Hi !!
:
: First sorry about my english.
: I really wont to know where can I start with Traffic control and load : balance. I have 2 links to internet and about 100 users.
: Could anybody tell me what can I read for start?? What papers ??? : Thank you very much and sorry for disturb.
: Best regards,
:
: Diego
:
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:
Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
[LARTC] newbie
In reply to Diego RodriguezHi all,
After posting some emails here and googling in the net. I have now a little clarity where and how to start bandwidth Management.
Hope I can still be guided though.
My understanding is I will be needing these modules and linux utilities. I hope someone can confirm.
1. I need to use iptables/ebtables for packet marking.
2. I can use tc for packet shaping.
3. I can use bwm_ng for bandwidth monitoring.
4. I need these modules in loaded into the kernel. CBQ, HTB, modules.
5. I need to create some configuration for CBQ/HTB.
Without these configuration or init scripts, i wont be able to use tc since it is using cbq/htb?
Is there still more things I'm missing.
Thanks for the patience. I am really new to this utilities.
Grace
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] newbie
In reply to Diego RodriguezQuoted 10 lines · Grace Baldonasa
Hi all,
After posting some emails here and googling in the net. I have now a little clarity where and how to start bandwidth Management. Hope I can still be guided though.
My understanding is I will be needing these modules and linux utilities. I hope someone can confirm.
1. I need to use iptables/ebtables for packet marking.
ebtables is applicable to bridges. I don't think you want or need to bridge.
I prefer to use iptables' connmark. Read about connmark here:
http://selab.edu.ms/twiki/bin/view/Networking/MultihomedLinuxNetworking
Quoted 1 line
2. I can use tc for packet shaping.
No. tc tells the scheduler module what it needs to know. It does not do the scheduling. Type
man tc
and start reading. Also read
http://lartc.org/howto/lartc.qdisc.html
Quoted 1 line
3. I can use
bwm_ngfor bandwidth monitoring.
I can't help you with that. The only monitors I know of are
and
http://yesican.chsoft.biz/lartc/netpsec.zip
(which is for WinBlow$), so please post the URL to bwm_ng.
Quoted 1 line
4. I need these modules in loaded into the kernel. CBQ, HTB, modules.
Modules are loaded into memory such that they can interface with the kernel. They are NOT "in" the kernel. If you know what a .dll is then a module is similar.
You need any one of the shaping modules. Make your choice after reading man tc and lartc.qdisc.html -- but when you build your kernel you should say "m" to everything in "QoS and/or fair queueing". Here is a partial list from my 2.4.29 kernel build:CONFIG_NET_SCHED=yCONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_CSZ=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_INGRESS=m
Read the top of
http://yesican.chsoft.biz/lartc/index.html
where it talks about building kernel versions 2.4.2# for htb. It is outdated, but have a look at
ftp://andthatsjazz.org/pub/lartc/BUILD-2.4.25
Quoted 1 line
5. I need to create some configuration for CBQ/HTB.
Yes, with tc or tcng. Personally, I think tcng stinks but you may love it; many people do. The Wonder Shaper is an educational configuration,
cbq http://lartc.org/howto/lartc.cookbook.ultimate-tc.html#AEN2233
htb http://lartc.org/howto/lartc.cookbook.ultimate-tc.html#AEN2241
but Jim DiGriz' QoS script is famous (fabulous):
Quoted 2 lines
Without these configuration or init scripts, i wont be able to use tc since it is using cbq/htb?
tc is used for many things other than cbq and htb, amongst which are hsfq, wrr and red So the answer to that question is "no"; tc has a lot more functions than you apparently think.
Quoted 2 lines
Is there still more things I'm missing.
Thanks for the patience. I am really new to this utilities.
The thing you are missing is the reading. Please go do it, and don't expect to read it just once. I have just given you DAYS worth of reading material.
Quoted 1 line
Grace
--
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc