QoS for real-time data on ADSL]
-----Forwarded Message-----
Quoted 22 lines
From: Tarek W. <[email protected]>
To: [email protected]
Subject: Re: [LARTC] QoS for real-time data on ADSL
Date: 26 Nov 2002 09:12:15 -0200This is purely theoretical... VOIP afaik consumes a decent amount of bandwidth... I gather you will not be doing any nat. My advice to u is to drop sqf as it is fu when it comes to bandwidth... I'd set up a root qdisc pfifo (1:), default flowid 22 (or 1:22), with a child (1:1) class again a regular pfifo only. now cap that at around 90% of the "stated" available speed maybe even less since its adsl... now create two children of that class, the first (1:21) with prio 1, the second (1:22)with prio 2 (i am not talking about the prio qdisc here, if ur lost, consult the lartc howto), rate and ceil r irrelevant. create two children under (1:21), 1:31 with prio 1 and 1:32 with prio2. enqueue sfq under the 1:31 and TBF under 1:32. now attach filters to the root qdisc which dump VOIP traffic in 1:21, then attach filters to 1:21 which dump ACK packets in 1:31 and others with lower priority to dump everything else (effectively all other VOIP traffic) in 1:32. i think that's a fullproof solution...
Quoted 8 lines
Quoted 6 lines · Thomas Jalsovsky
Hello,
I have an ADSL connection to ISP. Our config at the moment is 64k
upstream and 384 downstream. I would like to set up the upstream QoS polixy/shaping for allowing real-time protocols, in my case VoIP (RTP).
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/