Skip to contentSkip to conversation

one dude about rt_tables

LARTC Luis Miguel Cruz Miranda 2 participants 4 messages Nov 27, 2002

lore
Share & tools
lore
#1 lore raw

Luis,

: Can I add routes to rt_tables by hand with the vi editor?

/etc/iproute2/rt_tables contains a mapping of human names to routing table numbers. I call them table identifiers to table ids. This file does not contain routes.

: If I add a route to that file, it will be there if I reboot the box?

If you wish to add static routes to the system at boot, you should be able to use the system network initialization scripts and config files (e.g., redhat has a file /etc/sysconfig/static-routes).

Otherwise, you should write your own startup script or modify /etc/rc.d/rc.local to include the routes you wish to add.

If you are using network address translation, you may find my NAT SysV init scripts convenient:

http://plorf.net/linux-ip/html/scripts/nat
http://plorf.net/linux-ip/html/scripts/static-nat

Does that answer your question?

-Martin

Signature · 6 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Luis Miguel Cruz Miranda
Quoted 4 lines

/etc/iproute2/rt_tables contains a mapping of human names to routing table numbers. I call them table identifiers to table ids. This file does not contain routes.

So, if I understand all correctly, I don't need that file to use multiple route tables, do I?

Quoted 5 lines

: If I add a route to that file, it will be there if I reboot the box?

If you wish to add static routes to the system at boot, you should be able to use the system network initialization scripts and config files (e.g., redhat has a file /etc/sysconfig/static-routes).

I found a solution here:
http://www.samag.com/documents/s24/sam0201h/0201h.htm

Quoted 9 lines

Otherwise, you should write your own startup script or modify /etc/rc.d/rc.local to include the routes you wish to add.

If you are using network address translation, you may find my NAT SysV init scripts convenient:

http://plorf.net/linux-ip/html/scripts/nat
http://plorf.net/linux-ip/html/scripts/static-nat

Quoted 6 lines

Does that answer your question?

-Martin

--
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

Luis Miguel Cruz Miranda.
CCNA - Systems Administrator

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Luis Miguel Cruz Miranda

: >/etc/iproute2/rt_tables contains a mapping of human names to routing table : >numbers. I call them table identifiers to table ids. This file does not : >contain routes.
: So, if I understand all correctly, I don't need that file to use multiple : route tables, do I?

You are correct. It simply maps names to numbers so that you can use something like this if you want:

# ip route add default via 10.0.0.1 table dsl-link
# ip route add default via 10.0.0.2 table t1-link

Where the rt_tables file contains:

1 dsl-link
2 t1-link

If you do not have the file /etc/iproute2/rt_tables, you can use the following syntax .

# ip route add default via 10.0.0.1 table 1
# ip route add default via 10.0.0.2 table 2

: I found a solution here:
: http://www.samag.com/documents/s24/sam0201h/0201h.htm

I've not seen this before and will have to read this article. Thanks for the link.

I do have some general documentation on the use of "ip route" and "ip rule" in the appendices of my documentation available here:

http://plorf.net/linux-ip/

Let me know if you find any flaws, areas for improvement, or missing content.

-Martin

Signature · 7 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/