fw and u32 together...
hello...
1.
Is it possible using u32 to filter marked packets? I have found only documents to fw filter to filter marked packets...
2.
If u32 cannot filter marked packets is it possible to use fw and u32 together? I wanted to filter packets marked by iptables by fw, and packets depended on ip destination, src and others by u32, but something goes wrong :(
the filters configuration is:
$TC filter add dev $DEV_OUT parent 1: protocol ip prio 1 handle 2 fw flowid 1:10
$TC filter add dev $DEV_OUT parent 1: protocol ip prio 1 u32 \
match ip src 10.0.5.5 flowid 1:30If I use one of them everything is ok, but they don't want to work together:
"RTNETLINK answers: Invalid argument"
thanks...
/michal
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Michal Kustosik
hello...
1.
Is it possible using u32 to filter marked packets? I have found only documents to fw filter to filter marked packets...
You need the fw filter.
Quoted 6 lines
2.
If u32 cannot filter marked packets is it possible to use fw and u32 together? I wanted to filter packets marked by iptables by fw, and packets depended on ip destination, src and others by u32, but something goes wrong :(
Quoted 6 lines
the filters configuration is:
$TC filter add dev $DEV_OUT parent 1: protocol ip prio 1 handle 2 fw flowid1:10 $TC filter add dev $DEV_OUT parent 1: protocol ip prio 1 u32 \ match ip src 10.0.5.5 flowid 1:30If I use one of them everything is ok, but they don't want to work
I never tried it so I don't know if it can be done. What if you give them a different prio ??
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line · Stef Coene
On Thursday 28 November 2002 17:02, Michal Kustosik wrote:
[...]
Quoted 10 lines
Quoted 7 lines
the filters configuration is:
$TC filter add dev $DEV_OUT parent 1: protocol ip prio 1 handle 2 fw flowid1:10 $TC filter add dev $DEV_OUT parent 1: protocol ip prio 1 u32 \ match ip src 10.0.5.5 flowid 1:30If I use one of them everything is ok, but they don't want to work
I never tried it so I don't know if it can be done. What if you give them a different prio ??
it works good with different prio...
thanks...
/michal
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/