Skip to contentSkip to conversation

Tc & Suse Linux

LARTC Andreas Wright 3 participants 4 messages Dec 3, 2002

lore
Share & tools
lore
#0 lore raw

Hello ,

I am using Suse Linux version 2.4.5.

Where can I get tc utility for this version and what version of iproute2 should I be using ?

I want to use tc filters for prioritzing packets from a specific IP address.

Regards ,

Andreas.

---------------------------------
With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits your needs

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 1 line · Andreas Wright

I am using Suse Linux version 2.4.5.

there is no such suse version

the current version is 8.1

I guess that you've have 7.x, as I belive 2.4.5 is the version of your kernel

anyway tc and ip should be installed by default as suse use ip to setup the interfaces in Yast (in version minor to 8.0 where the changed to ifconfig)

Quoted 2 lines

Where can I get tc utility for this version and what version of iproute2 should I be using ?

as I said should be installt be default, if not grap the iproute2 package thats on the install cds

Quoted 2 lines

I want to use tc filters for prioritzing packets from a specific IP address.

I'm not sure if the QOS stuff is compiled into the standard suse kernel, if not you need to compile it by yourself.

- --
Regards,
Robert
- ----------------
Robert Penz
robert.penz AT outertech.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE97MdM8tTsQqJDUBMRAuvqAJ9vxqDEQSl4drNNaMkPIbyYf2YcIQCcCJck yzDJ73IreQjSRtJGbz9ZL8U=
=Yctp
-----END PGP SIGNATURE-----

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Andreas Wright

Yes you are right the linux kernel version 2.4.5
I didnt understand your comment " I'm not sure if the QOS stuff is compiled into the standard suse kernel, if not you need to compile it by yourself " What I am trying to do following
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:1 protocol ip prio 2 u32 \
flowid 10:2

My aim is to give priority to packets coming from 1.2.3.4 during dequeueing in the router. Regards,
Andreas.
Robert Penz <[email protected]> wrote:-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 1 line · Andreas Wright

I am using Suse Linux version 2.4.5.

there is no such suse version

the current version is 8.1

I guess that you've have 7.x, as I belive 2.4.5 is the version of your kernel

anyway tc and ip should be installed by default as suse use ip to setup the interfaces in Yast (in version minor to 8.0 where the changed to ifconfig)

Quoted 2 lines

Where can I get tc utility for this version and what version of iproute2 should I be using ?

as I said should be installt be default, if not grap the iproute2 package thats on the install cds

Quoted 2 lines

I want to use tc filters for prioritzing packets from a specific IP address.

I'm not sure if the QOS stuff is compiled into the standard suse kernel, if not you need to compile it by yourself.

- --
Regards,
Robert
- ----------------
Robert Penz
robert.penz AT outertech.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE97MdM8tTsQqJDUBMRAuvqAJ9vxqDEQSl4drNNaMkPIbyYf2YcIQCcCJck yzDJ73IreQjSRtJGbz9ZL8U=
=Yctp
-----END PGP SIGNATURE-----

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

---------------------------------
With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits your needs

#3 lore raw
In reply to Andreas Wright
Quoted 11 lines · Andreas Wright

Yes you are right the linux kernel version 2.4.5
I didnt understand your comment " I'm not sure if the QOS stuff is compiled into the standard suse kernel, if not you need to compile it by yourself " What I am trying to do following
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:1 protocol ip prio 2 u32 \
flowid 10:2

My aim is to give priority to packets coming from 1.2.3.4 during dequeueing in the router.

It's possible what you want to do.
Have you read the howto on www.lartc.org ?? And the examples/information on www.docum.org ??

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/