HTB on kernel 2.4.20
Hi,
I have a Linux box with kernel-2.4.20 HTB, IMQ patch + iptables-1.2.7a with IMQ and patched tc.
I tried to use htb.init script, wondershaper and myshaper
(http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ADSL-
Bandwidth-Management-HOWTO.html).
And seems to be the htb doesn't work (doesn't shape a trafic at all) I get no error messages.
How I may check it what is wrong?
Thank you in advance
Rimas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Rimas
Hi,
I have a Linux box with kernel-2.4.20 HTB, IMQ patch + iptables-1.2.7a with IMQ and patched tc.
I tried to use htb.init script, wondershaper and myshaper
(http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ADSL
- Bandwidth-Management-HOWTO.html).
And seems to be the htb doesn't work (doesn't shape a trafic at all) I get no error messages.
Quoted 1 line
How I may check it what is wrong?
You can do tc -s -d class show dev eth0 and examine the sent counters. Are they increasing ???
Stef
Signature · 9 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Stef,
Then I use tc -s -d class show dev eth0 - yes the sent counters are increasing.
myshaper script have missed ( iptables -t mangle -A MYSHAPER-IN -j IMQ "this part --todev 1") and so I can shape incooming and outgoing trafic without any problems.
Thank you for the command tc -s -d class show dev eth0.
But I still cannot use htb.init script (like you know it is much easer to use it, write rules)
How I may check that problem?
Best Regards
Rimas
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Rimas" <[email protected]>; <[email protected]>
Sent: Thursday, December 05, 2002 5:04 PM
Subject: Re: [LARTC] HTB on kernel 2.4.20
Quoted 5 lines · Rimas
Quoted 4 lines
Hi,
I have a Linux box with kernel-2.4.20 HTB, IMQ patch + iptables-1.2.7a
with
Quoted 3 lines
Quoted 3 lines
IMQ and patched tc.
I tried to use htb.init script, wondershaper and myshaper
(http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ADSL
Quoted 6 lines
Quoted 5 lines
- Bandwidth-Management-HOWTO.html).
And seems to be the htb doesn't work (doesn't shape a trafic at all) I get no error messages.How I may check it what is wrong?
You can do tc -s -d class show dev eth0 and examine the sent counters.
Are
Quoted 17 lines
they increasing ???
Stef
Signature · 9 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Rimas
Stef,
Then I use tc -s -d class show dev eth0 - yes the sent counters are increasing.
myshaper script have missed ( iptables -t mangle -A MYSHAPER-IN -j IMQ "this part --todev 1") and so I can shape incooming and outgoing trafic without any problems.
Thank you for the command tc -s -d class show dev eth0.
Quoted 3 lines
But I still cannot use htb.init script (like you know it is much easer to use it, write rules)
How I may check that problem?
If you use the htb.init script and execute that show command, are the counters increasing ??
I think it's more a bad configuration then a htb problem :)
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Stef,
When I tried to use htb.init script I just took example files:
eth0, eth0-2.root, eth0-2:10.www, eth0-2:20.smtp, eth0-2:30.dfl But htb.init makes nothing.
If I use the htb.init script and execute that show command, the counters not increasing.
Because there are no created classes.
Best regards
Rimas
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Rimas" <[email protected]>; <[email protected]>
Sent: Thursday, December 05, 2002 8:03 PM
Subject: Re: [LARTC] HTB on kernel 2.4.20
Quoted 11 lines · Rimas
Quoted 10 lines
Stef,
Then I use tc -s -d class show dev eth0 - yes the sent counters are increasing.
myshaper script have missed ( iptables -t mangle -A MYSHAPER-IN -j IMQ "this part --todev 1") and so I can shape incooming and outgoing trafic without any problems.
Thank you for the command tc -s -d class show dev eth0.But I still cannot use htb.init script (like you know it is much easer
to
Quoted 3 lines
Quoted 2 lines
use it, write rules)
How I may check that problem?If you use the htb.init script and execute that show command, are the
counters
Quoted 16 lines
increasing ??
I think it's more a bad configuration then a htb problem :)Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Rimas
Stef,
When I tried to use htb.init script I just took example files:
eth0, eth0-2.root, eth0-2:10.www, eth0-2:20.smtp, eth0-2:30.dfl But htb.init makes nothing.
If I use the htb.init script and execute that show command, the counters not increasing.
Because there are no created classes.
I think you have a htb.init configuration problem and I can't help you with that. Try to contact the author and/or read the docs again. Maybe there is a special htb.init mailing list.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/