ECN and ipitables: a political issue
Hi there!
I recently discovered that the linux kernel support Explicit Congestion Notification and that a fully ecn enabled network would have virtually no dropped packets.
Enabling that feature is a way to respect the infrastructure we use, and servers, routers or firewalls not complying with regularly approved standard like rfc 793 and 3168 are dammaging all of us, in a way not very different from that of spammers.
Being able to discriminate between good and bad guys it is possible through a filtering rule,
iptables -A POSTROUTING -t mangle -p tcp -d bad.guy.com -j ECN --ecn-tcp-remove.
Many thanks to the guys who wrote the kernel support and the target!
This is not a solution of the problem, but at least gives you the power to send an email the the system/network administrators and put that rule in our ILLEGAL_HOST_AND_NETS_VIOLATING_RFC793 chain. Many of those hosts simply do not have access to their routers' or firewalls' configuration.
Now, the problem is the rule seems not to be working and I cannot connect to those hosts unless turning ecn off (echo 0 > /proc/sys/net/ipv4/tcp_ecn), the wrong solution. I suspect I'm getting something wrong.
Miciej Soltysiak had a similar probelm with an illegal box in his network. Did you find a solution?
Please help. If I will solve this problem I promise that I will submit a patch proposal to the LARTC's mantainers. That's the best I can do to make people aware of this issue.
Thanks a lot.
Andrea
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Andrea Rossato
Being able to discriminate between good and bad guys it is possible through a filtering rule,
iptables -A POSTROUTING -t mangle -p tcp -d bad.guy.com -j ECN --ecn-tcp-remove.
Now, the problem is the rule seems not to be working and I cannot connect to those hosts unless turning ecn off (echo 0 >
/proc/sys/net/ipv4/tcp_ecn), the wrong solution. I suspect I'm getting something wrong.
(just for documentation)
i was not getting anything wrong: there was a bug in checksum recalculation after application of the ECN target. Patrick McHardy promprly posted a patch in netfilter-devel mailing list.
(the patch is attached to the present message)
Now the rule is working just fine!!
(should I submit a patch proposal to LARTC to document the issue?)
andrea
ipv4/netfilter/ipt_ECN.c renamed from ipv4/netfilter/ipt_ECN.c.orig +2 -2
@@ -88,8 +88,8 @@ }if (diffs[0 ] != *tcpflags) { - diffs[0 ] =htons (diffs[0 ]) ^0xFFFF ; - diffs[1 ] =htons (*tcpflags); + diffs[0 ] = diffs[0 ] ^0xFFFF ; + diffs[1 ] = *tcpflags; tcph->check =csum_fold (csum_partial ((char *)diffs,sizeof (diffs), tcph->check^0xFFFF ));