Skip to contentSkip to conversation

Trafic shaping

LARTC Gabriel Corcodel 2 participants 2 messages Dec 11, 2002 – Dec 12, 2002

lore
Share & tools
lore
#0 lore raw

Our Internet connection with our ISP is on optical fiber, and we can achieve in the so called "Metropolitan Area Network" speeds up to 50Mbps or more. The so called external connection which we have, using same provider, in order to reach the Internet, is, let's say, 2mbps. We have also, our own AS number, we're using zebra for bgp.
Question: I want to limit/to queue incoming traffic from the so-called "external" connection. So, for example, if a computer A, in our network, is downloading something from one ftp server connected to the metropolitan network, I want no limits. If the same computer wants to download something from the external network, the download should be shaped.
Let's say that I have network addresses from "metropolitan area network" or AS numbers from "metropolitan area network".
Any suggestions?

Gabriel Corcodel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi,
I have similar config. I'm sorting traffic on root filter (2 filter only, localnet and internet) by packet mark(all localnet is marked via mangle table based on bgp table). Then 2 slave clases dealing with custom users to set speed acording localnet/internet.
It would be intresting to hear other opinions about setup like this. Localnet consist of 209 rules:)

----- Original Message -----
From: "Gabriel Corcodel" <[email protected]>
To: <[email protected]>
Sent: Wednesday, December 11, 2002 3:01 AM
Subject: [LARTC] Trafic shaping

Quoted 15 lines

Our Internet connection with our ISP is on optical fiber, and we can achieve in the so called "Metropolitan Area Network" speeds up to 50Mbps or more. The so called external connection which we have, using same provider, in order to reach the Internet, is, let's say, 2mbps. We have also, our own AS number, we're using zebra for bgp.
Question: I want to limit/to queue incoming traffic from the so-called "external" connection. So, for example, if a computer A, in our network, is downloading something from one ftp server connected to the metropolitan network, I want no limits. If the same computer wants to download something from the external network, the download should be shaped.
Let's say that I have network addresses from "metropolitan area network" or AS numbers from "metropolitan area network".
Any suggestions?

Quoted 8 lines

Gabriel Corcodel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/