Unable to delete qdisc / class
Dear list,
I have setup a qdisc that I'd like to remove, but somehow it seems impossible.
-----------------
Output of show:
sh-2.04# tc -d qdisc show
qdisc cbq 22: dev eth0 rate 100Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 1us
sh-2.04# tc -d class show dev eth0
class cbq 22: root rate 100Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 1us
sh-2.04# tc -d filter show dev eth0
<nothing>
-----------------
If I do "tc qdisc del dev eth0 root" it says "RTNETLINK answers: No such file or directory".
If I do "tc class del dev eth0 classid 22:" it says "RTNETLINK answers:
Device or resource busy".
Can anyone tell me how I can get rid of my qdisc and class?
I am running iproute-2.4.7-1 on redhat 7.1, kernel 2.4.3-12smp.
TIA,
serge.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 18 lines · Serge Maandag
Dear list,
I have setup a qdisc that I'd like to remove, but somehow it seems impossible.
-----------------
Output of show:sh-2.04# tc -d qdisc show
qdisc cbq 22: dev eth0 rate 100Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 1ussh-2.04# tc -d class show dev eth0
class cbq 22: root rate 100Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 1us
Quoted 6 lines
sh-2.04# tc -d filter show dev eth0
<nothing>
-----------------If I do "tc qdisc del dev eth0 root" it says "RTNETLINK answers: No such file or directory".
Mhh. This should work.
Try this :
tc qdisc del dev eth0 root handle 22:
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thanx, but this is what I get:
sh-2.04# tc qdisc del dev eth0 root handle 22:
RTNETLINK answers: Invalid argument
So then I did:
sh-2.04# tc qdisc del dev eth0 root help
Usage: tc qdisc [ add | del | replace | change | get ] dev STRING
[ handle QHANDLE ] [ root | ingress | parent CLASSID ] [ estimator INTERVAL TIME_CONSTANT ]
[ [ QDISC_KIND ] [ help | OPTIONS ] ]
tc qdisc show [ dev STRING ] [ingress]
Where:QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. } OPTIONS := ... try tc qdisc add <desired QDISC_KIND> help
And I saw that handle is shown before root, so I tried:
sh-2.04# tc qdisc del dev eth0 handle 22: root
RTNETLINK answers: Invalid argument
It's about to drive me mad :(
Serge.
-----Original Message-----
From: Stef Coene [mailto:[email protected]]
Sent: Wednesday, December 11, 2002 6:54 PM
To: Serge Maandag; [email protected]
Subject: Re: [LARTC] Unable to delete qdisc / class
Quoted 18 lines · Serge Maandag
Dear list,
I have setup a qdisc that I'd like to remove, but somehow it seems impossible.
-----------------
Output of show:sh-2.04# tc -d qdisc show
qdisc cbq 22: dev eth0 rate 100Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 1ussh-2.04# tc -d class show dev eth0
class cbq 22: root rate 100Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 100Mbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 1us
Quoted 6 lines
sh-2.04# tc -d filter show dev eth0
<nothing>
-----------------If I do "tc qdisc del dev eth0 root" it says "RTNETLINK answers: No such file or directory".
Mhh. This should work.
Try this :
tc qdisc del dev eth0 root handle 22:
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 19 lines · Serge Maandag
Thanx, but this is what I get:
sh-2.04# tc qdisc del dev eth0 root handle 22:
RTNETLINK answers: Invalid argumentSo then I did:
sh-2.04# tc qdisc del dev eth0 root help
Usage: tc qdisc [ add | del | replace | change | get ] dev STRING
[ handle QHANDLE ] [ root | ingress | parent CLASSID ] [ estimator INTERVALTIME_CONSTANT]
[ [QDISC_KIND] [ help | OPTIONS ] ]tc qdisc show [ dev STRING ] [ingress]
Where:QDISC_KIND:= { [p|b]fifo | tbf | prio | cbq | red | etc. } OPTIONS := ... try tc qdisc add <desiredQDISC_KIND> help
Quoted 6 lines
And I saw that handle is shown before root, so I tried:
sh-2.04# tc qdisc del dev eth0 handle 22: root
RTNETLINK answers: Invalid argumentIt's about to drive me mad :(
I think you triggered a bug. But I don't know what you can do about it.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/