Skip to contentSkip to conversation

your mail

LARTC devik 1 participant 1 message Dec 11, 2002

lore
Share & tools
lore

devik

author
#0 lore raw

Hi,
I'm forwarding copy of the message to lartc group too as it may be of general interest.

Regarding your case I'll try to summarize our conversation. You asked me for explanation of an error message. I answered and asked for basic informations.
You followed with msg that there is no other info. I directed you where to find it and reasked basic config info again. Other mails where you told me that you are experienced enough and have no errors in your settings (I never told you have them) - still no tc -s info for me.
And in last mail you told "I am trying to help you more than you are trying to help me" !!

Well. I can answer only a few things:
1) From the first mail I asked for basic informations (tc -s -d ...) and I'm NOT ABLE to help you without them ! Instead of providing them you are telling me that I'm not willing to help.
2) I never underestimated your experience - you don't need to tell me that you set all correctly - I believe you. But if you want my help you should give me what I need.
3) I told you that if you got warnings about bad quantums then borrowing ratios are wrong. You tried to convince me that they are not. PLEASE, believe me, they are (even if only several percent). Remember - I wrote the damn thing and I know what it does.

The tc -s -d ... output I need can be obtained in any time - not only at time of error.
I'd never write a message like this, but your last sentence (that I'm not willing to help as much as you) disapointed me too much - because I already have problems in my work because spending my time on HTB (I'm solving at least one bug report per month - some of them took pretty long time before discovering that there was no real bug).

It is not the way opensource work like.
have a nice day,
devik

Quoted 71 lines

I haven't forgotten your requests nor am I ignoring you. It didn't do it today. Next time it does I will get the output. I am trying to help you more than you are trying to help me.

----- Original Message -----
From: "devik" <[email protected]>
To: "no0ne" <[email protected]>
Sent: Tuesday, December 10, 2002 2:33 AM
Subject: Re: your mail

Quoted 60 lines

thanks, can you also send me

Quoted 2 lines

tc -s -d qdisc
tc -s -d class show dev XXX

I asked two times for ? Also from your last mail I feel that you are unsatified with my "support services". Well if you think that I bother you then you think about the fact that I'm trying to help you while having nothing from it !

-------------------------------
Martin Devera aka devik
Linux kernel QoS/HTB maintainer
http://luxik.cdi.cz/~devik/

Quoted 43 lines · On Mon, 9 Dec 2002, no0ne wrote:

Here is some of the debugging info:

htb*c10117 m=2 t=-26777 c=-31288 pq=0 df41792 ql=0 pa=0 f:
htb*c10080 m=2 t=-45721 c161 pq=0 df98848 ql=0 pa=0 f:
htb*c10091 m=2 t3300 cF975 pq=0 dfD982272 ql=0 pa=0 f:
htb*c10109 m=2 t8099 cH174 pq=0 df`000000 ql=0 pa=0 f:
htb*c10118 m=2 t3300 cF975 pq=0 df211264 ql=0 pa=0 f:
htb*c10081 m=2 t=-68763 c‡38 pq=0 df"9376 ql=0 pa=0 f:
htb*c10090 m=2 t3300 cF975 pq=0 df`000000 ql=0 pa=0 f:
htb*c10108 m=2 t8099 c(187 pq=0 df`000000 ql=0 pa=0 f:
htb*c10119 m=2 t=-203578 c=-21102 pq=0 dfT8864 ql=0 pa=0 f:
htb*c10028 m=2 t2500 cF775 pq=0 df`000000 ql=0 pa=0 f:
htb*c10039 m=2 t1700 cF575 pq=0 df…1968 ql=0 pa=0 f:
htb*c10082 m=2 t9300 c638 pq=0 df736256 ql=0 pa=0 f:
htb*c10093 m=2 t2500 cF775 pq=0 df`000000 ql=0 pa=0 f:
htb*c10029 m=2 t8099 cH174 pq=0 df`000000 ql=0 pa=0 f:
htb*c10038 m=2 t62744 c62744 pq=0 df`000000 ql=0 pa=0 f:
htb*c10083 m=2 t8099 cH174 pq=0 df`000000 ql=0 pa=0 f:
htb*c10092 m=0 t=-156057 c=-57031 pqx001670 dfI152 ql=1 pa=2 f:
htb*c10048 m=2 t6900 cE375 pq=0 df85024 ql=0 pa=0 f:
htb*c10059 m=2 t9300 cE975 pq=0 df8985728 ql=0 pa=0 f:
htb*c10084 m=2 t9300 c'088 pq=0 df736256 ql=0 pa=0 f:
htb*c10095 m=2 t1700 cF575 pq=0 df$98560 ql=0 pa=0 f:
htb*c10049 m=2 t8099 cH174 pq=0 df`000000 ql=0 pa=0 f:
htb*c10058 m=2 t1700 ci599 pq=0 df`000000 ql=0 pa=0 f:
htb*c10085 m=2 t=-68763 c375 pq=0 df"9376 ql=0 pa=0 f:
htb*c10094 m=2 t2500 cF775 pq=0 df`000000 ql=0 pa=0 f:
htb*c10068 m=2 t3300 cF975 pq=0 df`000000 ql=0 pa=0 f:
htb*c10079 m=2 t3300 cF975 pq=0 df`000000 ql=0 pa=0 f:
htb*c10086 m=2 t8099 cH174 pq=0 df`000000 ql=0 pa=0 f:
htb*c10097 m=2 t2500 cF775 pq=0 df`000000 ql=0 pa=0 f:
htb*c10069 m=2 t1700 c3783 pq=0 df213120 ql=0 pa=0 f:
htb*c10078 m=2 t9300 c@975 pq=0 df`000000 ql=0 pa=0 f:
htb*c10087 m=2 t9300 cE975 pq=0 df`000000 ql=0 pa=0 f:
htb*c10096 m=2 t8099 cH174 pq=0 df`000000 ql=0 pa=0 f:

----- Original Message -----
From: "devik" <[email protected]>
To: "no0ne" <[email protected]>
Sent: Monday, December 09, 2002 1:39 AM
Subject: Re: your mail

Quoted 22 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

I didn't see anything after this message. It only did it once and

the

Quoted 2 lines
Quoted 2 lines

next

Quoted 1 line
Quoted 1 line

time I ran it with the same rates it went through without that

message.

Quoted 14 lines
Quoted 12 lines

If

Quoted 8 lines

only note, the debug info after the message is output at another level (not KERN_ERR). You could see it with "dmesg" cmd issued after that or by changing syslog.conf to log *.debug somewhere.
devik

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/