Skip to contentSkip to conversation

HTB bug?

LARTC Abraham van der Merwe 1 participant 1 message Dec 13, 2002

lore
Share & tools
lore
#0 lore raw

Hi!

A couple of weeks ago we started using the Linux TC implementation to shape clients (using HTB) and since then our QoS box started crashing every now and again (talk about inconvenient timing :P).

First we suspected hardware, but we replaced the hardware this week and it still keeps crashing. Current machine specs:

Celeron 400 MHz
128MB Ram
128MB Compact Flash storage
Distribution: stripped down Debian (woody)

The machine runs now services whatsoever:

------------< snip <------< snip <------< snip <------------

root@rana:~# netstat -anp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
PID/Program nam
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags       Type       State         I-Node PID/Program name
Path
------------< snip <------< snip <------< snip <------------

It has no load whatsoever.

The kernel:

2.4.20rc1 with Andrea Arcangeli's pausing fix applied (I'm running the kernel on several other machines that have much higher load (read: that actually has load), including my own workstation and they're all very stable.

The only other unknown is HTB and so I'm starting to suspect it. I'm using tc from the iproute ss020116-try tarball with the HTB 3.6 patch applied.

Now the problem is that I don't have enough space to log to disk - I'm just logging to console (also logging with kernel log level 8 to console). Each time I get to the machine it is completely dead, and the keyboard leds is flashing continuously. Unfortunately I can't see whether there is any oopses or last dying messages since I only have serial console on the machine right now (no messages to tty) and each time I didn't actually check the serial console.

I know this isn't a very useful bug report (will try to get something more useful later on), but I just want to know if somebody else have experienced the same kind of behaviour lately.

In anycase, I've removed all the rules from the machine and is going to just to QoS on our Cisco routers again until I resolve the problem :P

Signature · 11 lines
Regards
 Abraham

Real programmers don't write in BASIC.  Actually, no programmers write in
BASIC after reaching puberty.

___________________________________________________
 Abraham vd Merwe [ZR1BBQ] - Frogfoot Networks
 P.O. Box 3472, Matieland, Stellenbosch, 7602
 Cell: +27 82 565 4451 Http: http://www.frogfoot.net/
 Email: [email protected]