Skip to contentSkip to conversation

Nearly complettly victory

LARTC David Coello 2 participants 2 messages Dec 15, 2002

lore
Share & tools
lore
#1 lore raw
Quoted 5 lines · David Coello

Hi

At last i achive to make QOS works limitting bandwidth per port but with one exception : ftp. I don´t know why this port doesn´t works (aplies the default rule not the own). Anyone has experience with a similar problem?

Do you know how ftp works?

It uses one control-connection on a static port and dynamic data-connections. So it's only the control-connection that uses a known port. It's the data in this control-connection that you probably are limiting, and this is not what you want.

It is possible to mark all packets that are part of a ftp data-connection using iptables.

iptables -t mangle -A PREROUTING -m helper --helper ftp -j MARK --set-mark 1

This will work if you have the ip_conntrack_ftp module loaded or compiled into your kernel. It will only work for the ports (control-connection) which ip_conntrack_ftp has been told to listen to. (default only port 21, change with module option 'ports')

For control-connections on port 21 you use "ftp" to match. If it's say port 2121 and you've told ip_conntrack_ftp to listen to that port you should use "ftp-2121" to match.

I hope this helps.

Signature · 7 lines
/Martin

Never argue with an idiot. They drag you down to their level, then beat
you with experience.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/