Skip to contentSkip to conversation

Problem With Load Balancing the Links

LARTC hare ram 2 participants 6 messages Dec 22, 2002 – Dec 23, 2002

lore
Share & tools
lore

hare ram

author
#0 lore raw

Hi

iam following the Julian Nano.txt, iam able to setup all but when i check the following command

[root@pdn root]# ip route list table 222
default proto static
nexthop via 202.x.x.254 dev eth0 weight 256 dead onlink pervasive nexthop via 203.x.x.17 dev eth1 weight 1

why iam getting this dead onlink pervasive, the document says i should get weight 1
what ism doing wrong with this setup
some one suggest me

thanks
hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hello,

Quoted 7 lines · hare ram

iam following the Julian Nano.txt, iam able to setup all but when i check the following command

[root@pdn root]# ip route list table 222
default proto static
nexthop via 202.x.x.254 dev eth0 weight 256 dead onlink pervasive nexthop via 203.x.x.17 dev eth1 weight 1

This smells like one iproute utility bug, just upgrade to iproute2
from Year 2002 which fixes similar problem.

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#2 lore raw
In reply to hare ram

Hi

iam using redhat 8.0 with Latest Kernel 2.4.18-18.0
with iproute
[root@pdn root]# rpm -q iproute iproute-2.4.7-5

is this Corect or i need to still upgrade if so, i did not find latest than this

thanks
hare
----- Original Message -----
From: "Julian Anastasov" <[email protected]>
To: "hare ram" <[email protected]>
Cc: <[email protected]>
Sent: Sunday, December 22, 2002 10:12 PM
Subject: Re: [LARTC] Problem With Load Balancing the Links

Quoted 11 lines

Hello,

Quoted 6 lines · hare ram

iam following the Julian Nano.txt, iam able to setup all but when i check the following command

[root@pdn root]# ip route list table 222
default proto static
nexthop via 202.x.x.254 dev eth0 weight 256 dead onlink

pervasive

Quoted 5 lines
Quoted 1 line

nexthop via 203.x.x.17 dev eth1 weight 1

This smells like one iproute utility bug, just upgrade to iproute2 from Year 2002 which fixes similar problem.

Quoted 9 lines

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to hare ram

Hello,

Quoted 5 lines · hare ram

iam using redhat 8.0 with Latest Kernel
2.4.18-18.0
with iproute
[root@pdn root]# rpm -q iproute
iproute-2.4.7-5

I'm not sure if 2.4.7-5 covers the desired version but here it is:

ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss020116-try.tar.gz

Quoted 2 lines

is this Corect or i need to still upgrade
if so, i did not find latest than this

You can always list the above directory for latest tarballs

Quoted 2 lines

thanks
hare

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#4 lore raw
In reply to hare ram

Hi

thanks, for the suggestion
let me look and install this latest one

as you have mentioned in the documents, the last time should be default, but why iam getting 253 here

0:      from all lookup local
50:     from all lookup main
201:    from 202.63.96.0/24 lookup 201
202:    from 202.63.111.150/24 lookup 202
222:    from all lookup 222
32766:  from all lookup main
32767:  from all lookup 253

and iam not able to Ping or go out from My gateway IP i can only Ping my Gateway IP's

thanks
hare

----- Original Message -----
From: "Julian Anastasov" <[email protected]>
To: "hare ram" <[email protected]>
Cc: <[email protected]>
Sent: Monday, December 23, 2002 3:57 PM
Subject: Re: [LARTC] Problem With Load Balancing the Links

Quoted 23 lines

Hello,

Quoted 5 lines · hare ram

iam using redhat 8.0 with Latest Kernel
2.4.18-18.0
with iproute
[root@pdn root]# rpm -q iproute
iproute-2.4.7-5

I'm not sure if 2.4.7-5 covers the desired version but here it is:

ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss020116-try.tar.gz

Quoted 2 lines

is this Corect or i need to still upgrade
if so, i did not find latest than this

You can always list the above directory for latest tarballs

Quoted 2 lines

thanks
hare

Quoted 9 lines

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#5 lore raw
In reply to hare ram

Hello,

Quoted 2 lines · hare ram

as you have mentioned in the documents, the last time should be default, but why iam getting 253 here

Table "default" (253) is always there but we don't use it
because we want table "main" before 201 and 202.

Quoted 10 lines
0:      from all lookup local
50:     from all lookup main
201:    from 202.63.96.0/24 lookup 201
202:    from 202.63.111.150/24 lookup 202
222:    from all lookup 222
32766:  from all lookup main
32767:  from all lookup 253

and iam not able to Ping or go out from My gateway IP i can only Ping my Gateway IP's

Check the settings again.

Quoted 2 lines

thanks
hare

Regards

--
Julian Anastasov <[email protected]>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/