Skip to contentSkip to conversation

More complex example?

LARTC Donald Gordon 2 participants 4 messages Dec 31, 2002 – Jan 1, 2003

lore
Share & tools
lore
#0 lore raw

Hi

I'm completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like

     eth1
      |
     TBF
      |
     PRIO
     /  \

class class

but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc.

dev eth1 {

  egress {
    tbf (rate 128kbps, burst 64kb, limit 64kb, mtu 1510B) {
      prio (bands 2) {
        $ssh_fast = SLB(cir 32kbps, cbs 3kB);

class if ((tcp_sport = 22 || tcp_dport = 22) &&

                  SLB_ok($ssh_fast));
	class if 1;
      }
    }

}
}

Are there any examples of tcng scripts that do something slightly more complex than those in the tcng tarball?

don
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 11 lines · Donald Gordon

Hi

I'm completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like

     eth1

     TBF

     PRIO
     /  \
Quoted 4 lines

class class

but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc.

Tbf is classless. So you can't add a prio qdisc to a tbf qdisc.

Quoted 11 lines

dev eth1 {

  egress {
    tbf (rate 128kbps, burst 64kb, limit 64kb, mtu 1510B) {
      prio (bands 2) {
        $ssh_fast = SLB(cir 32kbps, cbs 3kB);

class if ((tcp_sport == 22 || tcp_dport == 22) &&

                  SLB_ok($ssh_fast));
	class if 1;
      }
    }
Quoted 5 lines

}
}

Are there any examples of tcng scripts that do something slightly more complex than those in the tcng tarball?

You can take a cbq or htb qdisc and add the prio to a class.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Donald Gordon
Quoted 7 lines · On Tue, 31 Dec 2002 11:25:46 +0100 Stef Coene <[email protected]> wrote:
Quoted 4 lines · Donald Gordon

Hi

I'm completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like

Tbf is classless. So you can't add a prio qdisc to a tbf qdisc.

So you're saying that classless qdiscs can only be leaves in the qdisc graph?

don
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Donald Gordon
Quoted 11 lines · Donald Gordon
Quoted 7 lines · On Tue, 31 Dec 2002 11:25:46 +0100 Stef Coene <[email protected]> wrote:
Quoted 4 lines · Donald Gordon

Hi

I'm completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like

Tbf is classless. So you can't add a prio qdisc to a tbf qdisc.

So you're saying that classless qdiscs can only be leaves in the qdisc graph?

No.
You can add a htb qdisc to a htb leave. I'm saying that tbf is a classless qdisc, so you don't have a class where you can add an other qdisc. Htb is tbf but with classes. So you can use a htb qdisc and add the prio qdisc to a htb class.

Btw, happy new year :)

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/