tc qdisc show - statistics truncated
I am trying to show PRIO qdisc stats, and always get statistics truncated as follows, could someone help to explain why and how correct it? Thanks,
Jingsong
# tc -s qdisc show dev eth0 qdisc prio 1: bands 8 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7 statistics truncated _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Jingsong Fu
I am trying to show PRIO qdisc stats, and always get statistics truncated as follows, could someone help to explain why and how correct it? Thanks,
Jingsong# tc -s qdisc show dev eth0 qdisc prio 1: bands 8 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7 statistics truncated
Your tc binary is not matching your kernel version, i would say. Install a new tc version, preferably from source.
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have tried the new tc source, however it still complains on "statistics truncated".
By looking into the function print_qdisc() of iproute2/tc/tc_qdisc.c, shown as follows,
if (RTA_PAYLOAD(tb[TCA_STATS]) < sizeof(struct tc_stats))
fprintf(fp, "statistics truncated");
struct tc_stats
{
__u64 bytes; /* NUmber of enqueues bytes */
__u32 packets; /* Number of enqueued packets */
__u32 drops; /* Packets dropped because of lack of resources */
__u32 overlimits; /* Number of throttle events when this
* flow goes out of allocated bandwidth */
__u32 bps; /* Current flow byte rate */
__u32 pps; /* Current flow packet rate */
__u32 qlen;
__u32 backlog;
#ifdef __KERNEL__
spinlock_t *lock;#endif
};
RTA_PAYLOAD() is 36 bytes, which is __u32 aligned. sizeof(struct tc_stats) is 40 bytes which is __u64 aligned.
Has anyone had the same issue, and what's the easy way to resolve it?
Thanks,
Jingsong
-----Original Message-----
From: Patrick McHardy [mailto:[email protected]]
Sent: Thursday, January 02, 2003 7:39 PM
To: Jingsong Fu
Cc: [email protected]
Subject: Re: [LARTC] tc qdisc show - statistics truncated
Quoted 8 lines · Jingsong Fu
I am trying to show PRIO qdisc stats, and always get statistics truncated as follows, could someone help to explain why and how correct it? Thanks,
Jingsong# tc -s qdisc show dev eth0 qdisc prio 1: bands 8 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7 statistics truncated
Your tc binary is not matching your kernel version, i would say. Install a new tc version, preferably from source.
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 20 lines · Jingsong Fu
I have tried the new tc source, however it still complains on "statistics truncated".
By looking into the function
print_qdisc()ofiproute2/tc/tc_qdisc.c, shown as follows,if (
RTA_PAYLOAD(tb[TCA_STATS])<sizeof(struct tc_stats))
fprintf(fp, "statistics truncated");struct
tc_stats{ __u64 bytes; /* NUmber of enqueues bytes */ __u32 packets; /* Number of enqueued packets */ __u32 drops; /* Packets dropped because of lack of resources */ __u32 overlimits; /* Number of throttle events when this * flow goes out of allocated bandwidth */ __u32 bps; /* Current flow byte rate */ __u32 pps; /* Current flow packet rate */ __u32 qlen; __u32 backlog; #ifdef __KERNEL__ spinlock_t *lock;
Quoted 6 lines
#endif
};
RTA_PAYLOAD()is 36 bytes, which is__u32aligned.sizeof(struct tc_stats)is 40 bytes which is__u64aligned.
On which platform are you trying ? on i386 i get sizeof(struct tc_stats) = 36 in userspace (without __KERNEL__ defined).
Quoted 3 lines
Has anyone had the same issue, and what's the easy way to resolve it?
The easy way is just replacing sizeof(...) by 36 and hoping that it works.
Bye,
Patrick
Quoted 27 lines
Thanks,
Jingsong
-----Original Message-----
From: Patrick McHardy [mailto:[email protected]]
Sent: Thursday, January 02, 2003 7:39 PM
To: Jingsong Fu
Cc: [email protected]
Subject: Re: [LARTC] tc qdisc show - statistics truncatedQuoted 9 lines · Jingsong Fu
I am trying to show PRIO qdisc stats, and always get statistics truncated as follows, could someone help to explain why and how correct it? Thanks,
Jingsong# tc -s qdisc show dev eth0 qdisc prio 1: bands 8 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7 statistics truncated
Quoted 6 lines
Your tc binary is not matching your kernel version, i would say. Install a new tc version, preferably from source.
Patrick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/