Skip to contentSkip to conversation

Help restricting bandwidth of individual clients

LARTC [email protected] 2 participants 2 messages Jan 5, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

im new to this stuff, before this, i was using hardware to manage my bandwidth.

I have a wireless AP (hostap) with a good connection. What i want is to shape my traffic to restrict each one of my wireless clients to a specific rate. Two to 33.6K, one to 128K, one to 256Kbps, some to 512K, and one to 1024K ...

I've read chapter 9 of the lartc-howto, it says it is possible, but is not really clear to me how to do this stuff. Do i need two eth cards and make a bridge? I read that HTB is better than CBQ, so im trying to use HTB.

Im using DHCP for my clients, so is this possible by just using their MAC's? Has anyone any script to make things easier?

I'll appreciate any link or info about this...
Thanks very much, ....

---
final question.
is there any shearch tool for the mailing-archive of lartc?

Ariel Molina

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 5 lines · On Sunday 05 January 2003 12:19, [email protected] wrote:

Hello,

im new to this stuff, before this, i was using hardware to manage my bandwidth.

Quoted 8 lines

I have a wireless AP (hostap) with a good connection. What i want is to shape my traffic to restrict each one of my wireless clients to a specific rate. Two to 33.6K, one to 128K, one to 256Kbps, some to 512K, and one to 1024K ...

I've read chapter 9 of the lartc-howto, it says it is possible, but is not really clear to me how to do this stuff. Do i need two eth cards and make a bridge? I read that HTB is better than CBQ, so im trying to use HTB.

A bridge is easy to put in an existing network because you don't have to reconfigure the network.

Quoted 2 lines

Im using DHCP for my clients, so is this possible by just using their MAC's? Has anyone any script to make things easier?

Yes. You can use the mac address with iptables to mark the packets. This mark can be used to put the traffic in the cass you want.

Quoted 1 line

I'll appreciate any link or info about this...

Have you found www.docum.org ?

Quoted 1 line

is there any shearch tool for the mailing-archive of lartc?

No idea ...

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/