Where does the Bandwidth Management taking place after/before
Hi!
I want to know exactly how the packet flow is occuring in BW management?
and
Where does the Bandwidth Management taking place after/before routing?
Kindly let me know asap.
tnr,
Srikanth
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
AFAIK:
local stuff: Application -> IPTABLES (OUTPUT) -> ROUTING -> QDISC
routing stuff: IPTABLES (PREROUTING/FORWARD) -> ROUTING ->
IPTABLES-POSTROUTING -> QDISC
these iptables-chains do sometimes a little wired stuff, depending on the jump-target/Chain (especially PREROUTING/NAT/...) sometimes routing-code is called to determine the route for iptables, but AFAIK ALL packets pass after the iptables-code the routing-code and ALWAYS as a LAST station the qdisc.
off course only outgoing stuff. incoming is more or less :) other way round.
Greetings
Tobias
Quoted 8 lines · Srikanth W
Hi!
I want to know exactly how the packet flow is occuring in BW management?
and
Where does the Bandwidth Management taking place after/before routing?
Quoted 10 lines
Kindly let me know asap.
tnr,
Srikanth_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] Where does the Bandwidth Management taking place
In reply to Srikanth WSrikanth,
: I want to know exactly how the packet flow is occuring in BW management?
Eh? Seems a bit of a general question....can this not be answered by some study of the queueing discipline you are using?
If you don't know where to start reading about the queueing discipline you are using, start at http://lartc.org/ and http://www.docum.org/ and, of course, a google search.
: Where does the Bandwidth Management taking place after/before routing?
Study the kernel packet travelling diagram, and you'll have a better idea of the answer to your question.
http://www.docum.org/stef.coene/qos/kptd/
The short answer is:
- egress traffic control occurs after all of the IP filtering, mangling and rewriting
- ingress traffic control occurs after iptables PREROUTING hooks (if you are using iptables) or ipchains input (if you are using ipchains)
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/