Skip to contentSkip to conversation

QoS with cisco & Linux

LARTC Mike 2 participants 3 messages Jan 13, 2003 – Jan 14, 2003

lore
Share & tools
lore
#1 lore raw
Quoted 3 lines · Mike

Hello, I am wondering if I can control inbound traffic by limiting the amount of traffic my cisco sends my linux box and have linux control outbound traffic with HTB is this possible?

Why not ? Inbound and output are 2 different flows.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#2 lore raw
In reply to Mike

Well I wanted to stay away from the IMQ device and just use HTB for inbound and outbound traffic but I guess I need some way to tell the sender to slow down. and the cisco is on my side of the link so the data has already saturated the line between me and the ISP when it reaches my interface. Oh well I will read up on it.
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Mike" <[email protected]>; <[email protected]>
Sent: Monday, January 13, 2003 4:37 PM
Subject: Re: [LARTC] QoS with cisco & Linux

Quoted 10 lines · Mike
Quoted 3 lines

Hello, I am wondering if I can control inbound traffic by limiting the amount of traffic my cisco sends my linux box and have linux control outbound traffic with HTB is this possible?

Why not ? Inbound and output are 2 different flows.

Stef

--

Quoted 9 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/