Skip to contentSkip to conversation

hashes - prio is not respected

LARTC Catalin BOIE 1 participant 1 message Jan 22, 2003

lore
Share & tools
lore
#0 lore raw

Hello!

Seems that if I add two filters in a hash node, prio doesn't matter anymore.
It's a known bug?

Long story:

If I do this:
echo "****************** jumptables..."
echo "*** 800: link 1:"
$tc filter add dev $dev parent 1: prio 1 u32 match ip nofrag hashkey mask 0xff000000 at 16 link 1:

echo "*** 1:1 link 2:"
$tc filter add dev $dev parent 1: prio 1 u32 ht 1:1: match ip nofrag hashkey mask 00ff0000 at 16 link 2:

echo "*** 2:2 link 3:"
$tc filter add dev $dev parent 1: prio 1 u32 ht 2:2: match ip nofrag hashkey mask 0000ff00 at 16 link 3:
echo "*** 3:3 link 4:"
$tc filter add dev $dev parent 1: prio 1 u32 ht 3:3: match ip nofrag hashkey mask 000000ff at 16 link 4:

# *************************** important part ****************************** tc filter add dev $dev parent 1: prio 2 u32 \
# ^^^

        ht 4:4: match ip dst 1.2.3.4/32 flowid 1:2

tc filter add dev $dev parent 1: prio 1 u32 \
# ^^^

        ht 4:4: match ip dst 1.2.3.4/32 flowid 1:3

But every ping to 1.2.3.4 goes to flowid 1:2 instead of 1:3 :(.

Thank you very much!

---
Catalin(ux) BOIE
[email protected]
H323: dino.rdsbv.ro

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/