Filter for large packets?
Hi,
i am using the wondershaper script on a DSL-router-firewall combination for several LAN clients. My Problem is that the port based filter rules dont match bulk traffic satisfyingly, because many file sharing programs allow to use custom ports. Usually a few connections that is not recognized as bulk are enough to fill up the 1:20 queue and slow down www and other normal traffic. Can anyone tell me a filter rule that matches Packets greater that a certain number of bytes. I think classifying outgoing packets > 512 or 1024 bytes as bulk should help here. Do you think this is a good idea, or am i missing something?
What would be a good size threshold to separate normal from bulk traffic?
regards,
Simon
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I figure it should be
tc filter add dev $DEV parent 1: protocol ip prio 10 u32 \
match ip protocol 6 0xff \
match u8 0x05 0x0f at 0 \
match u8 0x04 0x04 at 2 \
match u8 0x10 0xff at 33 \
flowid 1:30
but it doesn´t work... what am I doing wrong?
regards,
Simon
Quoted 13 lines · Simon Stemplinger
Hi,
i am using the wondershaper script on a DSL-router-firewall combination for several LAN clients. My Problem is that the port based filter rules dont match bulk traffic satisfyingly, because many file sharing programs allow to use custom ports. Usually a few connections that is not recognized as bulk are enough to fill up the 1:20 queue and slow down www and other normal traffic. Can anyone tell me a filter rule that matches Packets greater that a certain number of bytes. I think classifying outgoing packets > 512 or 1024 bytes as bulk should help here. Do you think this is a good idea, or am i missing something?
Quoted 4 lines
What would be a good size threshold to separate normal from bulk traffic?
regards,
Simon
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 11 lines · Simon Stemplinger
Hi,
i am using the wondershaper script on a DSL-router-firewall combination for several LAN clients. My Problem is that the port based filter rules dont match bulk traffic satisfyingly, because many file sharing programs allow to use custom ports. Usually a few connections that is not recognized as bulk are enough to fill up the 1:20 queue and slow down www and other normal traffic. Can anyone tell me a filter rule that matches Packets greater that a certain number of bytes. I think classifying outgoing packets > 512 or 1024 bytes as bulk should help here. Do you think this is a good idea, or am i missing something?
Maybe iptables can help you. It has a length match option so you can mark the packets based on the lengths.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/