Skip to contentSkip to conversation

problem with iproute and TEQL over predefinited tables

LARTC Claudio Agosti 1 participant 1 message Jan 24, 2003

lore
Share & tools
lore
#0 lore raw

hi, I've encrountred some problem with iproute2...

I'm building a router with kernel 2.4.20 but my script fail when I try to do a load balancing over a specific traffic, how explained on LARTC for balance the access between more link we should simple:

ip route add default scope global nexthop via IP1 dev ETH0 weight 1 \
nexthop via IP2 dev ETH1 weight 1

for specific traffic I'm marking some packets with mangle table and --set-mark, I've make iproute to lookup for marked packet and assign them over my specific table, but my command line for set routing:

ip route add table http nexthop via IP1 dev ETH0 weight 1 \
nexthop via IP2 dev ETH1 weight 1

fail, but I did't undestound why...

are there some suggestions :) ?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/