Skip to contentSkip to conversation

IMQ and outgoing traffic.

LARTC Leszek A.Szczepanowski 3 participants 3 messages Jan 28, 2003

lore
Share & tools
lore
#0 lore raw

Hello!
Configuring IMQ for egress traffic, it is not possible to specify interfaces which we want use to shape. iptables -t mangle -A POSTROUTING -j IMQ in effect direct all packets to IMQ pseudo-device, independent from interface the packet is going to out. How to specify, that we want to send to IMQ only packet destined to eth0,eth1,eth2, but NOT to eth3 ? My configuration is:
eth0,eth1,eth2 - local LANs, distributed traffic to various clients eth3 - main internet connection (ADSL)
So, packets TO eth3 are not destined to IMQ, for them I want to use separate HTB queue on this interface.

Signature · 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw

Leszek,

: Configuring IMQ for egress traffic, it is not possible : to specify interfaces which we want use to shape.

I'm afraid I'll have to disagree! :) Try adding the "-o interface" flag to your iptables command to select based on the output interface. Instead of:

iptables -t mangle -A POSTROUTING -j IMQ

Use:

iptables -t mangle -A POSTROUTING -o eth0 -j IMQ iptables -t mangle -A POSTROUTING -o eth1 -j IMQ iptables -t mangle -A POSTROUTING -o eth2 -j IMQ

As long as you don't write an iptables command which matches packets leaving eth3 (and directs them to IMQ), you should have what you desire.

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Leszek A.Szczepanowski

Hello,

please keep in mind that there is a BUG in IMQ code so you can't
add ingress and egress packets into the same IMQ device from the same physical device.
e.g.
iptables -t mangle -A POSTROUTING -o eth0 -j IMQ
iptables -t mangle -A PRETROUTING -i eth0 -j IMQ

You will get kernel panic (I tested it with 2.4.20-ac1 and latest IMQ/HTB).

Is this problem solved?

Thomas

Quoted 20 lines · Martin A. Brown

Leszek,

: Configuring IMQ for egress traffic, it is not possible : to specify interfaces which we want use to shape.

I'm afraid I'll have to disagree! :) Try adding the "-o interface" flag to your iptables command to select based on the output interface. Instead of:

iptables -t mangle -A POSTROUTING -j IMQ

Use:

iptables -t mangle -A POSTROUTING -o eth0 -j IMQ iptables -t mangle -A POSTROUTING -o eth1 -j IMQ iptables -t mangle -A POSTROUTING -o eth2 -j IMQ

As long as you don't write an iptables command which matches packets leaving eth3 (and directs them to IMQ), you should have what you desire.

Quoted 9 lines

-Martin

--
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/