cbq init for one port on a subnet
Hello,
We use cbq.init to limit bandwidth. It works great on a per-user basis. Now I'd like to limit traffic from a netblock to the Internet on port 6699.
Network is 192.168.0.160 mask 255.255.255.224
eth0 is the gateway
eth1 connects the netblock in question
Is this the proper syntax;
DEVICE=eth0,10Mbit,1Mbit
RATE0Kbit
WEIGHTKbit
PRIO=5
RULEf99 192.168.0.160/27,
Thanks!
Scott
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/