Skip to contentSkip to conversation

interface level b/w capping using HTB

LARTC hm 2 participants 2 messages Feb 5, 2003

lore
Share & tools
lore

hm

author
#0 lore raw

hi all

the following is the setup i have done.

eth0 globals ip
eth1 internal ip 10.1.1.0/24 --->>>shd be capped to max 256Kbit linux 8.0 with htb 3.6

tc qdisc add dev eth1 root handle 1:0 htb default 2
tc class add dev eth1 parent 1:0 classid 1:1 htb rate 250Kbit ceil 250Kbit tc class add dev eth1 parent 1:1 classid 1:2 htb rate 128Kbit ceil 250Kbit

then i created leaves from 1:5 to 1:50 each getting 16Kbit and ceil 20Kbit a range of 50 ipes
e.g.
tc class add dev eth1 parent 1:2 classid 1:5 htb rate 16Kbit ceil 20Kbit
tc filter add dev eth1 parent 1:0 protocol ip pref 5 u32 match dst 10.1.1.5/32 flowid 1:5

like that....

although for sometime this setup works fine but suddenly it goes totally unbouded.
i have gone thru the pages at docum.org and found out that if sum of child calsses exceed parent rate then parent rate is not respected.

then what shd i do if i have to cap outgoing b/w on eth1 stricktly to 256Kbit only. hope to get an early response.

regds
hm

#1 lore raw
Quoted 7 lines · hm

hi all

the following is the setup i have done.

eth0 globals ip
eth1 internal ip 10.1.1.0/24 --->>>shd be capped to max 256Kbit linux 8.0 with htb 3.6

Cool. Linux 8.0. Where can I download it? I thought they are working on getting 2.5.x stable and now they already is 8.0 :)

Quoted 3 lines

tc qdisc add dev eth1 root handle 1:0 htb default 2
tc class add dev eth1 parent 1:0 classid 1:1 htb rate 250Kbit ceil 250Kbit tc class add dev eth1 parent 1:1 classid 1:2 htb rate 128Kbit ceil 250Kbit

Why rate = 158 Kbit ??

Quoted 7 lines

then i created leaves from 1:5 to 1:50 each getting 16Kbit and ceil 20Kbit a range of 50 ipes
e.g.
tc class add dev eth1 parent 1:2 classid 1:5 htb rate 16Kbit ceil 20Kbit tc filter add dev eth1 parent 1:0 protocol ip pref 5 u32 match dst 10.1.1.5/32 flowid 1:5

Quoted 8 lines

like that....

although for sometime this setup works fine but suddenly it goes totally unbouded. i have gone thru the pages at docum.org and found out that if sum of child calsses exceed parent rate then parent rate is not respected.

then what shd i do if i have to cap outgoing b/w on eth1 stricktly to 256Kbit only. hope to get an early response.

Solution is easy. Make sure sum of child rates = parent rates. So if you have 45 classes (from 1:5 to 1:50) and a total rate of 256kbit, then use rate = 256kbit/45.

Stef

Signature · 9 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/