Count no of hosts
Is there any way to dynamically measure the no of concurrent internal hosts (IP's) utilising the linux NAT Gateway/forwarding box.
The idea is to measure the no of hosts actively using the gateway. I do not want to measure the no of TCP connections which iptraf does because it does not give the actual no of hosts.
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid963
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · CLS Prasad
Is there any way to dynamically measure the no of concurrent internal hosts (IP's) utilising the linux NAT Gateway/forwarding box.
The idea is to measure the no of hosts actively using the gateway. I do not want to measure the no of TCP connections which iptraf does because it does not give the actual no of hosts.
:)
On slashdot was an article about the same subject. It can be done if you really want to do so.
http://slashdot.org/article.pl?sid/02/05/2129218&mode=thread&tid•
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
: Is there any way to dynamically measure the no of concurrent internal : hosts (IP's) utilising the linux NAT Gateway/forwarding box.
If you have root level access to the box, you can use a bit of shell to determine the number of concurrent "clients" in any given instant. This assumes, of course, that you don't have an internally SNATed/masqueraded network which {c,w}ould hide more clients.
ipchains?
# /sbin/ipchains -MnL | awk '/[0-9][0-9]:[0-9][0-9]/{print $3}' \Quoted 1 line
| sort | uniq | wc -l
iptables?
# awk '/(ESTABLISHED|ASSURED)/{print $5}' /proc/net/ip_conntrack \Quoted 1 line
| sort | uniq
Naturally with iptables, you'll need to know a bit more about your use of the connection tracking to disambiguate any inbound or internal to DMZ connections to accurately count your SNAT/MASQUERADEd connections.
The above shell is not designed with efficiency in mind (obviously), but you get the idea.
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/