Skip to contentSkip to conversation

tcng and network processor

LARTC Chris Clark 2 participants 3 messages Feb 14, 2003 – Mar 4, 2003

lore
Share & tools
lore
#0 lore raw

I am considering a project to translate tcc output (C code or external interface) to network processor code, so that the NP can do the actual traffic shaping. I have a platform using the Intel IXP1200 NP on a PCI card, which functions as a NIC for the host PC running Linux. This approach would reduce the processing load on the host.

Has anyone attempted anything like this?

I have never used tcng before, but I have been reading all of the available documentation. Is there anything that I should know about tcc or its output before I attempt this?

Thanks,
Chris

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

I see that Bivio uses a network processor with TCNG, but I can't find any more details... There are no whitepapers on the website.

Werner (or anyone else at Bivio), are you able to provide any details?

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Chris Clark
Sent: Friday, February 14, 2003 12:03 AM
To: [email protected]
Subject: [LARTC] tcng and network processor

I am considering a project to translate tcc output (C code or external interface) to network processor code, so that the NP can do the actual traffic shaping. I have a platform using the Intel IXP1200 NP on a PCI card, which functions as a NIC for the host PC running Linux. This approach would reduce the processing load on the host.

Has anyone attempted anything like this?

I have never used tcng before, but I have been reading all of the available documentation. Is there anything that I should know about tcc or its output before I attempt this?

Thanks,
Chris

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Chris Clark
Quoted 3 lines · Chris Clark

I am considering a project to translate tcc output (C code or external interface) to network processor code, so that the NP can do the actual traffic shaping.

As Jacob has pointed out, tcc's external interface is what you're looking for.

Quoted 3 lines

I have a platform using the Intel IXP1200 NP on a PCI card, which functions as a NIC for the host PC running Linux. This approach would reduce the processing load on the host.

It's about time somebody tackles the Intel NPs :-) Actually, it would be good if - provided you get this project rolling - you could find a way to get Intel to let you release your code generator.

- Werner

Signature · 6 lines
  _________________________________________________________________________
 / Werner Almesberger, Buenos Aires, Argentina         [email protected] /
/_http://www.almesberger.net/____________________________________________/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/