Skip to contentSkip to conversation

quantum value for voip]

Fwd: Victor Cassar 1 participant 1 message Feb 17, 2003

lore
Share & tools
lore
#0 lore raw

Tnx Mathieu

I will try with pfifo, my voice traffic can be marked with diffserv from the source device, so i´ll try to take advantage of this marked traffic

regards

Quoted 29 lines · --- Mathieu Deziel

Hi Victor, see below.

Quoted 2 lines
Quoted 2 lines

Why not a simple fifo? You can adapt the size of

it

Quoted 3 lines
Quoted 1 line

from the command line.

I want tu use this pfifo queue i know its

hardwired

Quoted 4 lines

and that i need to mark packets here or from the
source
in order to use dscp field

The pfifo and bfifo qdiscs are not "hardwired". Their size is configurable (specified in bytes for the bfifo, and in number of packets for the pfifo). The one that is hardwired is the pfifo_fast: it is the default qdisc, the one that is there when you don't configure anything. The pfifo_fast has 3 internal prio
queues. Packets are classified in one of the three prio queue according to the dscp mark, just like you said in you previous mail. Yes, to make use of the priority capability of pfifo_fast, your packets must marked before they enter the tc software. You can use iptables to mark the packets before they enter tc.

Quoted 8 lines

Another thing you can do it make use of the prio qdisc, and then create your own (u32) filters. You can then mark the packets with dsmark before the packets go out, if you want.

Hope this helps,
Mathieu.

__________________________________________________
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/