limiting users on a 128kbit linw
Radus, see below.
Quoted 6 lines
I've been trying to write a traffic shaper for a 128kbit line with this setup :
5 computers that get dedicated bandwidth and the rest go in a pool with bigger priorities.
I do not see the priorities in your script. Only some of the filters have priorities, but it has nothing to do with scheduling (you should give prioirties to the HTB classes).
Quoted 6 lines
I made the attached script, but it seems it doesn't work...
It sends the traffic coming from the dedicated ips to the default class. Where is the error ?
You mean it all goes to 1:14 ?
Quoted 5 lines
I've set r2q to 1 (it's the smallest one possible, no ? ) and it receive warnings that the quantum is too small
Quantum = rate/r2q
For class 1:12, quantum = 10k/r2q = 10*1024(8*r2q) = 1280Bytes. This is smaller than MTU, that's why it complains that quantum is too small.
Same thing for classes 1:13 and 1:14, quantum = 640 Bytes, which is smaller them MTU.
What you can (and should) do is specify the quantum manually.
Quoted 51 lines
Thanks in advance....
Radu
Here's the script :
tc qdisc add dev eth1 root handle 1: htb default 14 r2q 1 tc class add dev eth1 parent 1: classid 1:1 htb rate 128kbit burst 2k tc class add dev eth1 parent 1:1 classid 1:10 htb rate 48kbit burst 2k
tc class add dev eth1 parent 1:1 classid 1:20 htb rate 12kbit ceil 128kbit burst 2k
tc class add dev eth1 parent 1:1 classid 1:30 htb rate 12kbit ceil 128kbit burst 2k
tc class add dev eth1 parent 1:1 classid 1:40 htb rate 12kbit ceil 128kbit burst 2k
tc class add dev eth1 parent 1:1 classid 1:50 htb rate 12kbit ceil 128kbit burst 2k
tc class add dev eth1 parent 1:1 classid 1:11 htb rate 20kbit ceil 128kbit burst 2k
tc class add dev eth1 parent 1:11 classid 1:12 htb rate 10kbit burst 2k tc class add dev eth1 parent 1:11 classid 1:13 htb rate 5kbit burst 2k tc class add dev eth1 parent 1:11 classid 1:14 htb rate 5kbit burst 2ktc qdisc add dev eth1 parent 1:20 handle 20: sfq perturb 15 tc qdisc add dev eth1 parent 1:30 handle 30: sfq perturb 15 tc qdisc add dev eth1 parent 1:40 handle 40: sfq perturb 15 tc qdisc add dev eth1 parent 1:50 handle 50: sfq perturb 15tc qdisc add dev eth1 parent 1:12 handle 12: sfq perturb 15 tc qdisc add dev eth1 parent 1:13 handle 13: sfq perturb 15 tc qdisc add dev eth1 parent 1:14 handle 14: sfq perturb 15tc filter add dev eth1 protocol ip parent 1: u32 match ip dst 192.168.0.45 flowid 1:20
tc filter add dev eth1 protocol ip parent 1: u32 match ip dst 192.168.0.4 flowid 1:30
tc filter add dev eth1 protocol ip parent 1: u32 match ip dst 192.168.0.50 flowid 1:40
tc filter add dev eth1 protocol ip parent 1: u32 match ip dst 192.168.0.38 flowid 1:50
Quoted 6 lines
tc filter add dev eth1 protocol ip parent 1: prio 1 u32 match ip sport 80
0xffffflowid 1:12
tc filter add dev eth1 protocol ip parent 1: prio 2 u32 match ip sport 250xffffflowid 1:13
tc filter add dev eth1 protocol ip parent 1: prio 3 u32 match ip sport 1100xffffflowid 1:13
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/