Skip to contentSkip to conversation

traffic state monitoring

LARTC [email protected] 2 participants 3 messages Feb 25, 2003 – Feb 26, 2003

lore
Share & tools
lore
#0 lore raw

It seems that the state monitoring ( -m state --state .... ) is valid in various tables and chains. My question is does it make any difference?

Say I need to monitor all the traffic that are started from from an application, even if it is using dynamic ports, where I put the state monitoring, PREROUTING , FORWARD or others ?

For example, assuming a ftp packet is entering eth1 and get DNAT-ed into an internal server 192.168.0.99 at PREROUTING and then gotten forward at FORWARD chain, is there any difference with one of these :-

iptables -t nat -I PREROUTING -p tcp --dport 21
-m state --state NEW,ESTABLISHED,RELATED

iptables -I FORWARD -p tcp --dport 21
-m state --state NEW,ESTABLISHED,RELATED

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 8 lines

is there any difference with one
of these :-

iptables -t nat -I PREROUTING -p tcp --dport 21
-m state --state NEW,ESTABLISHED,RELATED

iptables -I FORWARD -p tcp --dport 21
-m state --state NEW,ESTABLISHED,RELATED

I could be wacky, but at this early hour of the morning my foggy brain is noticing a few things.

-Neither of these rules jump to anything.
-The second rule is not attached to any table, which I don't think is possible...

For the first rule, I believe that rules in the nat table only apply to getting things mangled. Specifying the state in there would mean that only things in that state get mangled (dnat, snat, etc), based on the rules following it. Other packets would just have done with them whatever happens to packets aren't associated with a session (arent claimed by NAT, or any listening socket)

The second rule would catch packets that are to be forwarded (for nat, or for normal routing) that meet the specified requirements. What happens once it's caught depends on what you jump to....

Remember, I'm just an amateur, havent had my coffee yet, (insert other pithy excuse for my being wrong here).

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to [email protected]

Below:-

----- Original Message -----
From: "Brad Davidson" <[email protected]>
To: <[email protected]>
Sent: Wednesday, February 26, 2003 12:15 AM
Subject: Re: [LARTC] traffic state monitoring

Quoted 6 lines
Quoted 6 lines

is there any difference with one
of these :-

iptables -t nat -I PREROUTING -p tcp --dport 21
-m state --state NEW,ESTABLISHED,RELATED

Quoted 7 lines
Quoted 2 lines

iptables -I FORWARD -p tcp --dport 21
-m state --state NEW,ESTABLISHED,RELATED

I could be wacky, but at this early hour of the morning my foggy brain is noticing a few things.

-Neither of these rules jump to anything.

There is no need to jump to anything. The rules are added for traffic analysis. All that I am interested is the iptables counters for each rule. A rule without jump can be safely inserted ( even on top of the ruleset !) into a chain without disrupted anything and yet able to provide traffic statistics of interest to me.

Quoted 3 lines

-The second rule is not attached to any table, which I don't think is possible...

Aha, no tables mentioned it means 'filter' table. That's a standard behavior of iptables.

Quoted 7 lines

For the first rule, I believe that rules in the nat table only apply to getting things mangled. Specifying the state in there would mean that only things in that state get mangled (dnat, snat, etc), based on the rules following it. Other packets would just have done with them whatever happens to packets aren't associated with a session (arent claimed by NAT, or any listening socket)

Aha I thought I understood 30% of what you say here but after after doing it again and again, I must say I don't know what you are talking about.

Quoted 4 lines

The second rule would catch packets that are to be forwarded (for nat, or for normal routing) that meet the specified requirements. What happens once it's caught depends on what you jump to....

There is no need to jump to anything as I mentioned earlier.

But perhaps I would like to rephrase my question now, considering that I am getting cold response: how do I find out the traffic stats going thru a ftp or
h323 session ( considering that these applications create new connections which might not be using the same port etc ) ?

Should it be :-

iptables -I FORWARD -p tcp --dport 21

    -m state --state NEW,ESTABLISHED,RELATED

or

is this already sufficient :-

  iptables  -I FORWARD -p tcp --dport 21

Actually I am thinking of a new problem now, how do I do a traffic control on a
ftp session directly ? Is 'tc filter' sufficient ? Is it able to do connection tracking ?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/