module HTB
HI;
I am using kernel 2.4.20 and have compiled HTB as module. When I try to configure HTB this is printed when I write /sbin/lsmod.
------
[root@jabba iproute2]# /sbin/lsmod
Module Size Used by Not tainted
sch_htb 14784 0 (autoclean) (unused) 3c59x 28520 2
[root@jabba iproute2]#
------
What does (autoclean) and (unused) means???
When I configure cbq this happens.
------
[root@jabba iproute2]# /sbin/lsmod
Module Size Used by Not tainted
sch_cbq 14784 0 (autoclean) 3c59x 28520 2
[root@jabba iproute2]#
------
What is wrong width my htb???
Regards
Lars
Student
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 19 lines · Lars Landmark
HI;
I am using kernel 2.4.20 and have compiled HTB as module. When I try to configure HTB this is printed when I write
/sbin/lsmod.------
[root@jabba iproute2]#/sbin/lsmod
Module Size Used by Not taintedsch_htb 14784 0 (autoclean) (unused) 3c59x 28520 2[root@jabba iproute2]#
------What does (autoclean) and (unused) means???
When I configure cbq this happens.------
[root@jabba iproute2]#/sbin/lsmod
Module Size Used by Not tainted
Quoted 6 lines
sch_cbq 14784 0 (autoclean) 3c59x 28520 2[root@jabba iproute2]#
------What is wrong width my htb???
Nothing :)
Have you add a htb qdisc?
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 25 lines · Stef Coene
Quoted 24 lines · Lars Landmark
HI;
I am using kernel 2.4.20 and have compiled HTB as module. When I try to configure HTB this is printed when I write
/sbin/lsmod.------
[root@jabba iproute2]#/sbin/lsmod
Module Size Used by Not taintedsch_htb 14784 0 (autoclean) (unused) 3c59x 28520 2[root@jabba iproute2]#
------What does (autoclean) and (unused) means???
When I configure cbq this happens.------
[root@jabba iproute2]#/sbin/lsmod
Module Size Used by Not taintedsch_cbq 14784 0 (autoclean) 3c59x 28520 2[root@jabba iproute2]#
------
Quoted 3 lines
Quoted 1 line
What is wrong width my htb???
Nothing :)
Have you add a htb qdisc?
Yes, I have added htb qdisc
[root@jabba iproute2.lars]# ./tc/tc qdisc add dev eth1 root handle 1: htb default 10
[root@jabba iproute2.lars]# /sbin/lsmod
Module Size Used by Not taintedsch_htb 3872 0 (autoclean) (unused)
3c59x 28520 2
Is it possible that I have a wrong tc-tool?? However if I had wrong tc-tool, then why is sch_htb module loaded???
Regards
Lars
Student
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
[root@jabba iproute2.lars]# ./tc/tc qdisc add dev eth1 root handle 1: htb default 10
[root@jabba iproute2.lars]#/sbin/lsmod
Module Size Used by Not taintedsch_htb3872 0 (autoclean) (unused)
3c59x 28520 2Is it possible that I have a wrong tc-tool??
No.
Quoted 2 lines
However if I had wrong
tc-tool, then why issch_htbmodule loaded???
Have you compiled the htb qdisc as module? If you did, that's why it's loaded.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Stef Coene
Quoted 7 lines
[root@jabba iproute2.lars]# ./tc/tc qdisc add dev eth1 root handle 1: htb default 10
[root@jabba iproute2.lars]#/sbin/lsmod
Module Size Used by Not taintedsch_htb3872 0 (autoclean) (unused)
3c59x 28520 2
Quoted 7 lines
Quoted 1 line
Is it possible that I have a wrong tc-tool??
No.
Quoted 2 lines
However if I had wrong
tc-tool, then why issch_htbmodule loaded???Have you compiled the htb qdisc as module? If you did, that's why it's loaded.
Thanks for your patience for my novice question.. :-)
Yes I have compiled HTB as module and I am using 2.4.20 kernel. My question is, why do I see "unused" when I configure HTB, but not when configure cbq...
How can I check that HTB has been loaded properly. And what to do next, if it has not??
Regards
Lars
Student
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 15 lines · Lars Landmark
Quoted 14 lines · Stef Coene
Quoted 8 lines
[root@jabba iproute2.lars]# ./tc/tc qdisc add dev eth1 root handle 1:
htb default 10
[root@jabba iproute2.lars]#/sbin/lsmod
Module Size Used by Not taintedsch_htb3872 0 (autoclean) (unused)
3c59x 28520 2Is it possible that I have a wrong tc-tool??
No.
Quoted 2 lines
However if I had wrong
tc-tool, then why issch_htbmodule loaded???
Quoted 8 lines
Quoted 2 lines
Have you compiled the htb qdisc as module? If you did, that's why it's loaded.
Thanks for your patience for my novice question.. :-)
Yes I have compiled HTB as module and I am using 2.4.20 kernel. My question is, why do I see "unused" when I configure HTB, but not when configure cbq...
Aha :)
# lsmod |grep htb sch_htb 10784 1 (autoclean)
I don't know why lsmod thinks your htb module is not in use.
Quoted 2 lines
How can I check that HTB has been loaded properly. And what to do next, if it has not??
As long as you can shape traffic it's loaded ok :)
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/