Skip to contentSkip to conversation

specifing interface in IF ?!

LARTC raptor 2 participants 3 messages Feb 28, 2003 – Mar 7, 2003

lore
Share & tools
lore

raptor

author
#0 lore raw

does anyone know how can I make class-path based on interface from which the packet comes ?!

dev eth0 {
	class(<$c1>) if interface-eth0;

	egress {
		htb() {
			$c1 = class(rate 1mbps) {
				class(rate 100kbps, ceil 150kbps) if ip_dst = x.x.x.x;
				class(rate 50kbps, ceil 100kbps) if ip_dst = y.y.y.y;
			}
		}
	}
}

any idea ?!
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 4 lines

Subject: [LARTC] [tcng] specifing interface in IF ?!

does anyone know how can I make class-path based on interface from which the packet comes ?!

We implemented something like this:

dev "s0e0" {
    ingress {
        class (<>,set_color(GREEN))
            if tcp_dport = PORT_HTTP;
        class (<>,set_color(YELLOW))
            if tcp_dport = PORT_SMTP;
        class (<>,set_color(RED))
            if 1;
    }
}
dev "s1e0" {
    egress {
        class (<>,set_dscp(0x12))
            if color = GREEN;
        class (<>,set_dscp(0x23))
            if color = YELLOW;
        class (<>,set_dscp(0x34))
            if color = RED;
        drop if 1; /* not reached */

        fifo;
    }
}

but you can't do this with tcng-tc.

- Jacob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#2 lore raw
In reply to raptor

I was reading the some of the post and idea comes to my mind...
If I mark the packets incoming from some interface with iptables and then use this mark for classifing in tcng.. (I see there is "fw"-classifier in tcng language, dont know how to use it...).
Did u tried something like this..

Jacob Teplitsky <[email protected]> wrote:

|
|> Subject: [LARTC] [tcng] specifing interface in IF ?!
|> 
|> does anyone know how can I make class-path based on interface from which the packet comes ?!
|
|We implemented something like this:
|dev "s0e0" {
|    ingress {
|        class (<>,set_color(GREEN))
|            if tcp_dport = PORT_HTTP;
|        class (<>,set_color(YELLOW))
|            if tcp_dport = PORT_SMTP;
|        class (<>,set_color(RED))
|            if 1;
|    }
|}
|
|dev "s1e0" {
|    egress {
|        class (<>,set_dscp(0x12))
|            if color = GREEN;
|        class (<>,set_dscp(0x23))
|            if color = YELLOW;
|        class (<>,set_dscp(0x34))
|            if color = RED;
|        drop if 1; /* not reached */
|
|        fifo;
|    }
|}
|
|but you can't do this with tcng-tc.
|
|- Jacob
|_______________________________________________
|LARTC mailing list / [email protected]
|http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
|

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/