Skip to contentSkip to conversation

How to change HTB default value?

LARTC 권우식 2 participants 3 messages Mar 6, 2003 – Mar 8, 2003

lore
Share & tools
lore

권우식

author
#0 lore raw

Hi.

I want to change HTB qdisc's default setting to 20.

but, i cannot change it.

# tc qdisc change dev eth0 root handle 1: htb default 20
RTNETLINK answers: Invalid argument

I can add qdisc and del qdisc. but can't change qdisc setting.

For class, I can add, del, change all setting.

How to change HTB qdisc's default value?

author
#1 lore raw

Hi.

I want to change HTB qdisc's default setting to 20.

but, i cannot change it.

# tc qdisc change dev eth0 root handle 1: htb default 20
RTNETLINK answers: Invalid argument

I can add qdisc and del qdisc. but can't change qdisc setting.

For class, I can add, del, change all setting.

How to change HTB qdisc's default value?ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿË™¨¥Šx%ŠË,S ùšŠYšŸ÷lõ¯ç–m§ÿÿ™¨¥™©ÿvÏZþy™¨¥™©ÿ–+-ŠwèþV«µÁÎY3ÿ†Ûiÿÿåj»\þŠà

#2 lore raw
In reply to 권우식
Quoted 6 lines · openings

Hi.

I want to change HTB qdisc's default setting to 20.

but, i cannot change it.

Quoted 8 lines
# tc qdisc change dev eth0 root handle 1: htb default 20
RTNETLINK answers: Invalid argument

I can add qdisc and del qdisc. but can't change qdisc setting.

For class, I can add, del, change all setting.

How to change HTB qdisc's default value?

I don't think it's possible. So you have to delete and re-add the qdisc again.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/