Skip to contentSkip to conversation

U-turn route

LARTC [email protected] 2 participants 2 messages Mar 7, 2003

lore
Share & tools
lore
#0 lore raw

I have tested this, it seems to be working but I need double confirmation
:-

Given for example,

hostA: 192.168.0.1/24

routerB: 192.168.0.2/24

              192.228.118.2/24

routeC: 192.168.0.3/24

            192.228.110.3/24

In other words, A,B,C are sitted in the same LAN, while B and C each has an external network connected to it.

Given the hostA is rather dumb and that we can only configure one default route, and that we have defaulted the route to B. In order for A to be able to access C's external network, we configure a U-turn route at B, ie the packet hop onto B and then re-forwarded on the same interface to C.

Is this something commonly done ? Any issue with it ?

Regards.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hello there Mingching,

: hostA: 192.168.0.1/24
:
: routerB: 192.168.0.2/24
: 192.228.118.2/24
:
: routeC: 192.168.0.3/24
: 192.228.110.3/24
:
: Given the hostA is rather dumb and that we can only configure one : default route, and that we have defaulted the route to B. In order : for A to be able to access C's external network, we configure : a U-turn route at B, ie the packet hop onto B and then re-forwarded : on the same interface to C.
:
: Is this something commonly done ? Any issue with it ?

There is no problem with this. This is not uncommon--typically, router B will generate an ICMP redirect bound for host A, causing host A (if it accepts redirects) to create a route (cache) entry for the destination.

If you wish traffic to move through routerB at all times, you can suppress and/or enable the generation of redirects with the sysctl net/ipv4/conf/$DEV/send_redirects [1] toggle. If host A is a linux box, you can also see if it will net/ipv4/conf/$DEV/accept_redirects

I have occasionally seen peculiar TCP resets as a result of ICMP redirects not handled correctly be machines in the position of host A, but it causes no problem for routers and should pose no problem for end hosts.

-Martin

[1] http://ipsysctl-tutorial.frozentux.net/ipsysctl-tutorial.html#AEN630
[2] http://ipsysctl-tutorial.frozentux.net/ipsysctl-tutorial.html#AEN574

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/