Skip to contentSkip to conversation

CBQ Traffic control not working

LARTC Mugur TOMITA 2 participants 2 messages Mar 12, 2003

lore
Share & tools
lore
#0 lore raw

Stef Coene, thank you for your feed-back. I have already read docum.org... The tests proved a difference of max 20Kbps between theory and real life for cbq.
In my case practically nobody is limited...
In my scripts there are classes with prio 8... you say max is 7... could this be the problem?
Could it be possible that on hard traffic cbq to just let pass packets? This is a stupid question I guess...
Do I have a chance solving the problem by swtching to HTB?

This is what MRTG says about one of my 14.4Kbps clients :-)
Max In 234.4 kb/s (2.3%) Average In 76.0 kb/s (0.8%) Current In 872.0 b/s (0.0%)

Any opinion on 'Traffic Shaper'? I'm considering changing the shaping tool...

MT

Quoted 12 lines · Mugur TOMITA

Hi everybody,

I'm new to this list, so I appologize if a similar case has been covered already... I have the configuration attached below...
The problem is that my traffic control doesn't work at all... Clients from any of the private networks manage to download even with 256Kbits from the Internet...
The case is stranger because if I reboot the linux box, for a few minutes the traffic shapping seems to work... I mean from a machine in subnet 192.168.1.8/29 I download with 16-20Kbits... but not always (most often I get at least 128Kbps).

Quoted 3 lines

A second question would be who has a higher priority:
a PC from a prio 8 class filtered by a prio 3 filter, or a PC from a prio 3 class filtered by a prio 8 filter?

Prio for filters is used to order the filters. Filters with lower prio are checked first. Prio for a class is something else. A class with a lower prio is allowed to send data first before the other classes. And prio 7 is the biggest prio you can specify.

I found no errors in your tc rules.
If you want more info about cbq (tests/docs/scripts/tips/faq/...) you can go to http://docum.org.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 3 lines · Mugur TOMITA

Stef Coene, thank you for your feed-back. I have already read docum.org... The tests proved a difference of max 20Kbps between theory and real life for cbq.

That's because cbq has to guess the conditions on the link and it uses some averages. Like packet size.

Quoted 3 lines

In my case practically nobody is limited...
In my scripts there are classes with prio 8... you say max is 7... could this be the problem?

No. If you do
tc -s -d class show dev eth0
you propably see prio 7 for the prio 8 classes.

Quoted 3 lines

Could it be possible that on hard traffic cbq to just let pass packets? This is a stupid question I guess...
Do I have a chance solving the problem by swtching to HTB?

Yes and no :)
htb is easier to understand/implement, there are no obscure options. But if your problem is setup related, reimplementing the rules in htb can create the same problem.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/