Skip to contentSkip to conversation

route with two uplinks actually slower than one

LARTC John covici 3 participants 3 messages Mar 17, 2003 – Mar 21, 2003

lore
Share & tools
lore
#0 lore raw

Hi. At the moment I have two high speed connections to the internet -- one somewhat faster than the other. I was looking at the advanced router howto and created the tables, etc as specified in section 4.2 of that document and changed my default route to a multipath route with weight 2 on the faster provider and weight 1 for the slower one.

Then I went and downloaded a test file, but to my surprise I was getting a lower speed than with the default route to the faster provider. Is there a better way to do this so it actually does me some good?

Even if it doesn't work I have certainly learned something in the process, but I thought two routes would be better than one.

Any suggestions would be appreciated.

Signature · 5 lines
         John Covici
         [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 10 lines · John covici

Hi. At the moment I have two high speed connections to the internet -- one somewhat faster than the other. I was looking at the advanced router howto and created the tables, etc as specified in section 4.2 of that document and changed my default route to a multipath route with weight 2 on the faster provider and weight 1 for the slower one.

Then I went and downloaded a test file, but to my surprise I was getting a lower speed than with the default route to the faster provider. Is there a better way to do this so it actually does me some good?

On your own, with 1 single test file, multipath routing not help. However, it will help in providing more throughput when a lot of traffic is flowing to and from different sites.

Think of it as a multiprocessing problem: if you have only one linear process, there is nothing to multitask. If, however, you have a number of processes they can be dealt with in parallel on the different processing chains (uplinks, in this case), and the end result will be faster overall.

Doei, Arthur.

Signature · 7 lines
  /\    / |      [email protected]      | Work like you don't need the money
 /__\  /  | A friend is someone with whom | Love like you have never been hurt
/    \/__ | you can dare to be yourself   | Dance like there's nobody watching

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to John covici

John,
Keep in mind this is not true load balancing. It's simple put a crude
way to use more than one connection as a single gateway from the inside, and to have some level of redundancy. As mention by Arthur, you only benefit from multiple requests/users. Single transfers won't tell you much of anything.

In my case when I has two SDSL lines things were much faster. Now that
I am down to one things are slower. So I have had an opposite experience.

Signature · 12 lines
Sincerely,
William L. Thomson Jr.
Support Group
Obsidian-Studios, Inc.
3548 Jamestown Ln.
Jacksonville, FL 32223
Phone/Fax  904.260.2445
http://www.obsidian-studios.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/