Skip to contentSkip to conversation

How to use the tc -s [statistics] option?

LARTC David Reoch 3 participants 3 messages Mar 28, 2003 – Mar 29, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I've tried every combination (except the RIGHT one, of course) to see what the tc cbq statistics are. I really just want to see what it's doing - I'm trying to rate limit napster/peer2peer apps, but they still seem to be hogging up all of my T1 bandwidth.

Here's my tc config rules, minus the long list of ports in the class:

tc qdisc del dev eth0 root [eth0 is the Internet facing interface] tc qdisc add dev eth0 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth0 root cbq weight 1Mbit allot 1514

tc qdisc del dev eth1 root [eth1 is the intranet facing interface] tc qdisc add dev eth1 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth1 root cbq weight 1Mbit allot 1514

tc class add dev eth1 parent 1: classid 1:50 cbq bandwidth 10Mbit rate 35Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded tc qdisc add dev eth1 parent 1:50 handle 50 tbf rate 35Kbit buffer 10Kb/8 limit 15Kb mtu 1500
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 1755 0xffff match ip dst 0/0 classid 1:50
tc filter add [etc....]

same filter adds for eth0

Thank you for assistance,
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Hi David,

Try

tc -s qdisc ls dev eth0
tc -s qdisc ls dev eth1

Regards,

Edo

----- Mensaje original -----
De: "David Reoch" <[email protected]>
Para: <[email protected]>
Enviado: Viernes, 28 de Marzo de 2003 17:24
Asunto: [LARTC] How to use the tc -s [statistics] option?

Hi,

I've tried every combination (except the RIGHT one, of course) to see what the tc cbq statistics are. I really just want to see what it's doing - I'm trying to rate limit napster/peer2peer apps, but they still seem to be hogging up all of my T1 bandwidth.

Here's my tc config rules, minus the long list of ports in the class:

tc qdisc del dev eth0 root [eth0 is the Internet facing interface] tc qdisc add dev eth0 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth0 root cbq weight 1Mbit allot 1514

tc qdisc del dev eth1 root [eth1 is the intranet facing interface] tc qdisc add dev eth1 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth1 root cbq weight 1Mbit allot 1514

tc class add dev eth1 parent 1: classid 1:50 cbq bandwidth 10Mbit rate 35Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded tc qdisc add dev eth1 parent 1:50 handle 50 tbf rate 35Kbit buffer 10Kb/8 limit 15Kb mtu 1500
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 1755 0xffff match ip dst 0/0 classid 1:50
tc filter add [etc....]

same filter adds for eth0

Thank you for assistance,
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to David Reoch
Quoted 6 lines · David Reoch

Hi,

I've tried every combination (except the RIGHT one, of course) to see what the tc cbq statistics are. I really just want to see what it's doing - I'm trying to rate limit napster/peer2peer apps, but they still seem to be hogging up all of my T1 bandwidth.

You create bounded cbq classes and you add a tbf qdisc that bounds the traffic in these classes again. So you don't need the tbf qdisc. I'm not sure it will change a lot, but you can try to replace the tbf qdisc with a prio or sfq qdisc.

Quoted 10 lines

Here's my tc config rules, minus the long list of ports in the class:

tc qdisc del dev eth0 root [eth0 is the Internet facing interface] tc qdisc add dev eth0 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth0 root cbq weight 1Mbit allot 1514

tc qdisc del dev eth1 root [eth1 is the intranet facing interface] tc qdisc add dev eth1 root handle 1 cbq bandwidth 10Mbit avpkt 1000 cell 8 tc class change dev eth1 root cbq weight 1Mbit allot 1514

Quoted 7 lines

tc class add dev eth1 parent 1: classid 1:50 cbq bandwidth 10Mbit rate 35Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded tc qdisc add dev eth1 parent 1:50 handle 50 tbf rate 35Kbit buffer 10Kb/8 limit 15Kb mtu 1500
tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip sport 1755 0xffff match ip dst 0/0 classid 1:50
tc filter add [etc....]

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/