IMQ patch
Hey guys,
I want to use IMQ with netfilter support. I know that I need to patch
the kernel (2.4.20) to get this to work properly. Ive tried a number of things so far and I cant seem to get to the the IMQ target support for netfilter to appear in the make menuconfig. Anyways, could someone post directions and links to the patches I need to apply to get this?
Thanks,
Jay
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 7 lines · Jay Wineinger
Hey guys,
I want to use IMQ with netfilter support. I know that I need to patch
the kernel (2.4.20) to get this to work properly. Ive tried a number of things so far and I cant seem to get to the the IMQ target support for netfilter to appear in the make menuconfig. Anyways, could someone post directions and links to the patches I need to apply to get this?
And you have to do
cd /usr/src/linux
patch -p1 < <imq-patch>
It's possible that you get some warnings, but last time I tried it, it worked for me.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Ok, I untarred a new copy of the 2.4.20 source and then i applied the
http://trash.net/~kaber/imq/imq-2.4.18.diff-10 patch against it with patch -p1 <../imq-2.4.18.diff-10 which produced this output:
patching file Documentation/Configure.help
Hunk #1 succeeded at 8758 (offset 402 lines).
patching file drivers/net/Config.in
Hunk #1 succeeded at 7 (offset -1 lines).
patching file drivers/net/Makefile
Hunk #1 succeeded at 158 (offset 13 lines).
patching file drivers/net/imq.c
patching file include/linux/imq.h
patching file include/linux/skbuff.h
patching file net/core/skbuff.c
patching file net/sched/sch_generic.c
Then I did make menuconfig and I have Network Device Support -> IMQ support, but I have no IMQ references under Networking Options -> Netfilter Configuration
I then applied the http://trash.net/~kaber/imq/iptables-1.2.6a-imq.diff-3
patch thinking that might have something to do with the IMQ target issues. The patch applies with this output:
patching file extensions/.IMQ-test
patching file extensions/.IMQ-test6
patching file extensions/libip6t_IMQ.c
patching file extensions/libipt_IMQ.c
patching file patch-o-matic/extra/IMQ.patch
patching file patch-o-matic/extra/IMQ.patch.config.in patching file patch-o-matic/extra/IMQ.patch.configure.help patching file patch-o-matic/extra/IMQ.patch.help patching file patch-o-matic/extra/IMQ.patch.ipv6 patching file patch-o-matic/extra/IMQ.patch.ipv6.config.in patching file patch-o-matic/extra/IMQ.patch.ipv6.configure.help patching file patch-o-matic/extra/IMQ.patch.ipv6.help patching file patch-o-matic/extra/IMQ.patch.ipv6.makefile patching file patch-o-matic/extra/IMQ.patch.makefile
For the record, I tried to follow the FAQ at
http://trash.net/~kaber/imq/faq.html, and I cant seem to get the "make patch-o-matic" to work. Im following the directions there in order, buit when I try that, it says "nothing to do for patch-o-matic."
Id appreciate any help people can provide,
Jay
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
Do you have the iptables source installed in
/usr/src/iptables-1.2.6a
&&
Quoted 3 lines
Iptables is in two parts. Kernel space and userspace. The imq-2.4.18.diff-10 patch is for kernel space only. This one is for userspace.
ahh, that clears it up. Will try again in a couple hours. thanks guys
Jay
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/