Skip to contentSkip to conversation

problem with marking packets and sending them out

LARTC John Covici 1 participant 1 message Apr 2, 2003

lore
Share & tools
lore
#0 lore raw

I have two interfaces and I want smtp to go out one of them so I did the following:

iptables -t mangle -A OUTPUT -p tcp --dport 25 -j MARK --set-mark 1 ip rule add fwmark 1 table mail.out
ip route add default via ${GATEWAY} dev eth1 table mail.out ip route add default via ${PPP_REMOTE}
iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to ${IPADDR}
iptables -t nat -A POSTROUTING -o ppp0 -j SNAT --to ${PPP_LOCAL}

where GATEWAY is the network for that interface, $IPADDR is the corresponding local ip and the PPP_REMOTE and PPP_LOCAL work similarly for ppp0.

Now what happens is that if a connection comes in on IPADDR things work correctly (I have set up two tables already so packets go back out correctly), but if I am in the router box and do telnet <any host> 25 it just hangs -- I see packets coming back from the host correctly, but somehow the telnet doesn't see them -- what am I doing wrong here?

Any assistance would be appreciated.

Signature · 5 lines
         John Covici
         [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/