Skip to contentSkip to conversation

BW using CBQ/tc for VPN Ipsec i/f?

LARTC Srikanth 3 participants 5 messages Apr 7, 2003 – Apr 8, 2003

lore
Share & tools
lore

Srikanth

author
#0 lore raw

Hi all,

I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this,

DEVICE=ipsec0,10Mbit,1Mbit
RATE8Kbit
WEIGHTKbit
PRIO=5
RULE2.128.1.0/24

Does it work
or
What else options need to be taken care like ipsec packets/protocol/port # etc.?
C'd anybody suggest please?

regds,
Srikanth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#1 lore raw

How about, if i shall use tc / iproute2 ?

Thanks for the quickest response.

Srikanth.

Quoted 43 lines · hare ram

if you are using the cbq.init script yes it works

hare
----- Original Message -----
From: "Srikanth" <[email protected]>
To: <[email protected]>
Sent: Monday, April 07, 2003 2:45 PM
Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?

Quoted 26 lines

Hi all,

I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this,

DEVICE=ipsec0,10Mbit,1Mbit
RATE=128Kbit
WEIGHT=10Kbit
PRIO=5
RULE=192.128.1.0/24

Does it work
or
What else options need to be taken care like ipsec packets/protocol/port # etc.? C'd anybody suggest please?

regds,
Srikanth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Srikanth
Quoted 1 line · Srikanth

How about, if i shall use tc / iproute2 ?

cbq.init uses tc But it makes configuring tc more easy because you can use simple config files.

Stef

Quoted 39 lines

Srikanth.

Quoted 4 lines · hare ram

if you are using the cbq.init script yes it works

hare
----- Original Message -----

From: "Srikanth" <[email protected]>

Quoted 28 lines

To: <[email protected]>
Sent: Monday, April 07, 2003 2:45 PM
Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?

Quoted 24 lines

Hi all,

I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this,

DEVICE=ipsec0,10Mbit,1Mbit
RATE8Kbit
WEIGHTKbit
PRIO=5
RULE2.128.1.0/24

Does it work
or
What else options need to be taken care like ipsec packets/protocol/port # etc.?
C'd anybody suggest please?

regds,
Srikanth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#3 lore raw
In reply to Srikanth
Quoted 11 lines · Stef Coene
Quoted 3 lines · Srikanth

How about, if i shall use tc / iproute2 ?

cbq.init uses tc But it makes configuring tc more easy because you can use simple config files.

Stef

It's OK., my question was about, if i use tc, shall i need to pass ipsec protocol / port number as arguments? i mean, Is there any mechanism to recognize ipsec packets / VPN tunnels.

Srikanth.

Quoted 52 lines
Quoted 49 lines

Srikanth.

Quoted 6 lines · hare ram

if you are using the cbq.init script yes it works

hare
----- Original Message -----

From: "Srikanth" <[email protected]>

Quoted 32 lines

To: <[email protected]>
Sent: Monday, April 07, 2003 2:45 PM
Subject: [LARTC] BW using CBQ/tc for VPN Ipsec i/f?

Quoted 26 lines

Hi all,

I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this,

DEVICE=ipsec0,10Mbit,1Mbit
RATE=128Kbit
WEIGHT=10Kbit
PRIO=5
RULE=192.128.1.0/24

Does it work
or
What else options need to be taken care like ipsec packets/protocol/port # etc.?
C'd anybody suggest please?

regds,
Srikanth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Srikanth
Quoted 4 lines · Srikanth

It's OK., my question was about, if i use tc, shall i need to pass ipsec protocol / port number as arguments?
i mean, Is there any mechanism to recognize ipsec packets / VPN tunnels.

Once the IPsec tunnel is set up, you can recognize tunneled traffic
easily: (in tunnel mode) source and destination IP addresses will be that of the two endpoints, and IP packets will have a "protocol" field with values "decimal 50" (esp) or "decimal 51" (ah).

While the tunnel is being stablished, and if using IKE, both endpoints exchange packets with their own IP, UDP transport protocol, and both source and destination ports set to "decimal 500".

At least that is what I recall, check FreeS/WAN website (www.freeswan.org) for complete information on traffic generated by an IPsec tunnel.

Hope it helps.

Signature · 5 lines
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Sid (Linux 2.4.20-xfsip)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/