Skip to contentSkip to conversation

routing strategies for 2 adsl setup

LARTC christopher cuse 3 participants 4 messages Apr 8, 2003 – Apr 9, 2003

lore
Share & tools
lore
#0 lore raw

hi all,

i have been able to find only a trickle of information concerning possible strategies for a 2 adsl setup using two different isp's.

has anyone had experience in the usa or elsewhere working with their providers to carry bgp tables, or would you recommend/implement a round-robin arrangement?

how ? :-)

yours sincerely

christopher cuse, rhce/ccna
[email protected]
redhat 8.0

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Christopher,

Quoted 4 lines · christopher cuse

hi all,

i have been able to find only a trickle of information concerning possible strategies for a 2 adsl setup using two different isp's.

There should be a fair amount. Did you look in the archives and etc.

Quoted 3 lines

has anyone had experience in the usa or elsewhere working with their providers to carry bgp tables, or would you recommend/implement a round-robin arrangement?

I do not think bgp applies in this scenario. By nature if you have ADSL lines you are going for low cost, high speed bandwidth. I am not aware of ISP providing bgp service to ADSL customers. I would assume you use to be in a large scale network, and bgp would be running internally and not communicating with the ISP.

Round robin on the other hand really addresses a different issue.

Bottom line I know what you are trying to do but I believe you are over complicating the scenario. I have been there, I looked into bgp, and in a way I guess I used round robin.

In brief forget about bgp at least for now. Look into setting up a multipath route to your various isp's. You will need to compile a custom kernel, that has certain patches applied. You will build your routes, and that will give you what you are in search of from the inside out. Now from the outside in you will need DNS to do round robin, load balance, or simply to provide multiple IP's for a given domain name, or server.

Docs on the inside out part appear to have moved. Catched versions are
http://216.239.39.100/search?q�che:MYvpvnMUmfsC:www.linuxvirtualserver.org/~julian/+Julian+routes&hl=en&start=1&ie=UTF-8
http://216.239.39.100/search?q�che:OeB96bctG8UC:www.linuxvirtualserver.org/~julian/nano.txt+Julian+routes&hl=en&start=2&ie=UTF-8

Julian is a regular participant on this list so if he catches this hopefully he can provide a url to where things currently reside. Otherwise send him an email for the patches you need when you are ready.

Docs on the outside in
http://www.samag.com/documents/s24/sam0201h/0201h.htm
(Pay attention to the DNS part and forget the rest)

Or see the Bind manual, or the manual/docs for your DNS server on using more than one IP address for a domain name.

Also make sure to dig through the archives of this list. There is allot of info there.

In a day or two I will post my old config. It will not come with instructions just the actual commands and IP addresses I used when load balancing/combining two SDSL lines.

Signature · 12 lines
Sincerely,
William L. Thomson Jr.
Support Group
Obsidian-Studios, Inc.
3548 Jamestown Ln.
Jacksonville, FL 32223
Phone/Fax  904.260.2445
http://www.obsidian-studios.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to christopher cuse

: Docs on the inside out part appear to have moved. Catched versions are
: http://216.239.39.100/search?q�che:MYvpvnMUmfsC:www.linuxvirtualserver.org/~julian/+Julian+routes&hl=en&start=1&ie=UTF-8
: http://216.239.39.100/search?q�che:OeB96bctG8UC:www.linuxvirtualserver.org/~julian/nano.txt+Julian+routes&hl=en&start=2&ie=UTF-8
:
: Julian is a regular participant on this list so if he catches this
: hopefully he can provide a url to where things currently reside.
: Otherwise send him an email for the patches you need when you are ready.

Visit Julian's page:

http://www.ssi.bg/~ja/
http://www.ssi.bg/~ja/#routes

: Also make sure to dig through the archives of this list. There is allot : of info there.

Use "site:mailman.ds9a.nl" in addition to your other keywords at google:

http://www.google.com/search?hl=en&ie=UTF-8&oe=UTF-8&q=site%3Amailman.ds9a.nl+2+DSL+lines&btnG=Google+Search

-Martin

Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/