Skip to contentSkip to conversation

Listing classes from a PRIO qdisc

LARTC Orlie Brewer 1 participant 1 message Apr 10, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I'm new to this mailing list, so I hope that I'm not repeating a well hashed out subject. I've searched the mailing list archives but couldn't find anything on this.

When I create a prio qdisc and look at its classes

# tc qdisc add dev eth0 root handle 1: prio
# tc qdisc show dev eth0          qdisc prio 1: bands 3 priomap  1 2 2 2 1 
2 0 0 1 1 1 1 1 1 1 1
# tc class show dev eth0
class prio 1: parent 1: [UNKNOWN]
class prio 1: parent 1: [UNKNOWN]
class prio 1: parent 1: [UNKNOWN]

why does the minor number not show up in the class handle? In other words, why doesn't it show up like

# tc class show dev eth0
class prio 1:1 parent 1: [UNKNOWN]
class prio 1:2 parent 1: [UNKNOWN]
class prio 1:3 parent 1: [UNKNOWN]

From looking at the source code for sch_prio.c, it looks like it
is set in prio_dump_class by

tcm->tcm_handle |= TC_H_MIN(cl);

where cl is the band number and tcm->tcm_handle already has the major number set, but when tc gets it from rtnetlink, it still just has the major number. I looks like it should work.

BTW, I'm using Red Hat Linux release 7.3

Thanks for any help,

Signature · 7 lines
    Orlie Brewer
    The Boeing Company         VOICE: (425) 865 - 3191,
    P.O. Box 3707, MS 7L-48    FAX:   (425) 865 - 2965
    Seattle, WA 98124-2207     EMAIL: [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/