how can i filter for a range of ports?
how can i filter for a range of ports? I have seen people use 1024:32000 when saying from port 1024 to 32000 but tc doesnt accept this? can somebody tell me how i can do this? -thanks
---------------------------------
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
Quoted 3 lines · Adam Schrader
how can i filter for a range of ports? I have seen people use 1024:32000 when saying from port 1024 to 32000 but tc doesnt accept this? can somebody tell me how i can do this? -thanks
You cannot easyly do this, but there is a solution:
You can use a mask != 0xffff for ports.
Very probably you must use several lines to cover whole range. So, as an example, for 1024 -> 1279 (1024 + 256 - 1) you can use match tcp sport 1024 0xff00.
For 4096 -> 65535 you can use:
match tcp sport 4096 0xf000
I think you get the idea.
Or you can just use marking.
Quoted 7 lines
---------------------------------
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
---
Catalin(ux) BOIE
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
Quoted 1 line
"AS" = Adam Schrader <[email protected]> writes:
AS> how can i filter for a range of ports? I have seen people use AS> 1024:32000 when saying from port 1024 to 32000 but tc doesnt AS> accept this? can somebody tell me how i can do this? -thanks
iptables -A INPUT -p tcp --dport 1024:65535 -j ACCEPT
Should do what you want. iptables is very limited in defining ranges, multiple hosts and similar ranges compares to ipfw2. I hope this will change sometime in the future since it would highly simplify the definitions of large rulesets.
/ahnberg.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Mattias Ahnberg
Quoted 1 line
Quoted 1 line
"AS" = Adam Schrader <[email protected]> writes:
AS> how can i filter for a range of ports? I have seen people use AS> 1024:32000 when saying from port 1024 to 32000 but tc doesnt AS> accept this? can somebody tell me how i can do this? -thanks
Quoted 6 lines
iptables -A INPUT -p tcp --dport 1024:65535 -j ACCEPT
Should do what you want. iptables is very limited in defining ranges, multiple hosts and similar ranges compares to ipfw2. I hope this will change sometime in the future since it would highly simplify the definitions of large rulesets.
There is an iptables patch to do this :
http://www.netfilter.org/documentation/pomlist/pom-base.html#mport
Example :
iptables -A FORWARD -p tcp -m mport --ports 23:42,65
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/