Rshaper-2.01 issue with Linux8.0
I am facing problem with running rshaper-2.01 with Linux 8.0 version (redhat).
It used to run fine with Linux7.1 version.
Is there any update on rshaper available for 8.0
Thanks
Tushar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Tushar Gupta
I am facing problem with running rshaper-2.01 with Linux 8.0 version (redhat).
It used to run fine with Linux7.1 version.Is there any update on rshaper available for 8.0
I don't know.
But if you want to shape traffic, you better use the tc command line to configure a htb or cbq setup. This is more powerfull then rshaper. More info about tc can be found on www.lartc.org and www.docum.org.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have looked at tc and information on www.docum.org earlier too. I have a feeling that it is going to take a lot of time before I become comfortable with tc/htb/cbq, and understand all its nuiances.
I am looking forward to some quick and maybe not so good solution as directly working with tc. With rshaper I just needed to specify IP and amount of max bandwidth I want to allocate to the host, and I am up and running.
Tushar
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Stef Coene
Sent: Saturday, April 19, 2003 5:36 PM
To: Tushar Gupta; [email protected]
Subject: Re: [LARTC] Rshaper-2.01 issue with Linux8.0
Quoted 4 lines · Tushar Gupta
I am facing problem with running rshaper-2.01 with Linux 8.0 version (redhat). It used to run fine with Linux7.1 version.
Is there any update on rshaper available for 8.0
I don't know.
But if you want to shape traffic, you better use the tc command line to configure a htb or cbq setup. This is more powerfull then rshaper. More info about tc can be found on www.lartc.org and www.docum.org.
Stef
Signature · 14 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Tushar Gupta
I have looked at tc and information on www.docum.org earlier too. I have a feeling that it is going to take a lot of time before I become comfortable with tc/htb/cbq, and understand all its nuiances.
I am looking forward to some quick and maybe not so good solution as directly working with tc. With rshaper I just needed to specify IP and amount of max bandwidth I want to allocate to the host, and I am up and running.
If you want to do only that, that's not soo difficult. Using htb is easy if you copy a working script.
Of course, you need to read some docs to understand how it works. But it's not that difficult if you don't care about the fine tuning options.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Tushar Gupta
I have looked at tc and information on www.docum.org earlier too. I have a feeling that it is going to take a lot of time before I become comfortable with tc/htb/cbq, and understand all its nuiances.
I am looking forward to some quick and maybe not so good solution as directly working with tc. With rshaper I just needed to specify IP and amount of max bandwidth I want to allocate to the host, and I am up and running.
Something else. RedHat is not Linux. And Linux is not RedHat. So it's not Linux8.0, but RedHat 8.0. But it's the linux kernel 2.4.19 or so. So if you need some help, plz specify the output of "uname -a" and your distribution like ReadHat 8.0.
Stef
--
[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/