Masquerade and tc filter
Hello,
I am building a gateway/shaper. As always, there is a locl network 192.168.3.0/24 and connection to internet. Gateway masquerades these connections. I need to limit upload and download speed for certain IPs. With download traffic everything is ok: i have put filters on the local netwrok interface. But I can't set up filters by source address on outgoing traffic - the interface which makes masquerading. I have noticed that all traffic have the same router source address set.
So, what's the solution? Maybe it is imposible? But I have looked through wondershaper and I saw that there are source address filters.
Please give me a hint. I am using kernel 2.4.20.
Bye,
Tadas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I know what imq is. Everything is O.K. with download traffic. I need to shape Upload traffic. But the problem is that u32 filter does not match correct source address for forwarded packets - only gateway's.
Bye,
Tadas
----- Original Message -----
From: "peyrak" <[email protected]>
To: "Tadas" <[email protected]>
Sent: Sunday, April 27, 2003 11:51 AM
Subject: Re: [LARTC] Masquerade and tc filter
Quoted 16 lines
imq
###########################
# Jirka Pirko # # [email protected] # # [email protected] # # cellular: +420608065259 # # icq uin: 136218111 # ########################### ----- Original Message ----- From: "Tadas" <[email protected]> To: <[email protected]> Sent: Sunday, April 27, 2003 8:43 AM Subject: [LARTC] Masquerade and tc filter
Quoted 7 lines
Quoted 5 lines
Hello,
I am building a gateway/shaper. As always, there is a locl network 192.168.3.0/24 and connection to internet. Gateway masquerades these connections. I need to limit upload and download speed for certain IPs.
With
Quoted 1 line
download traffic everything is ok: i have put filters on the local
netwrok
Quoted 2 lines
Quoted 2 lines
interface. But I can't set up filters by source address on outgoing traffic - the interface which makes masquerading. I have noticed that
all
Quoted 3 lines
Quoted 3 lines
traffic have the same router source address set.
So, what's the solution? Maybe it is imposible? But I have looked
through
Quoted 4 lines
Quoted 4 lines
wondershaper and I saw that there are source address filters.
Please give me a hint. I am using kernel 2.4.20.
Quoted 9 lines
Quoted 7 lines
Bye,
Tadas_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines · Tadas
Hello,
I am building a gateway/shaper. As always, there is a locl network 192.168.3.0/24 and connection to internet. Gateway masquerades these connections. I need to limit upload and download speed for certain IPs. With download traffic everything is ok: i have put filters on the local netwrok interface. But I can't set up filters by source address on outgoing traffic - the interface which makes masquerading. I have noticed that all traffic have the same router source address set.
Quoted 4 lines
So, what's the solution? Maybe it is imposible? But I have looked through wondershaper and I saw that there are source address filters.
Please give me a hint. I am using kernel 2.4.20.
The solution is to mark the packets when they enter your firewall. Give each ip a different mask (so this happens before the src address is rewritten). When they leave the firewall, you can use that mark with the fw filter. That mark only exists in your kernel memory, so it's only valid in your firewall.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/