Multicast Routing (PIM-SM)
I am having problems with getting PIM-SM v2 multicast routing working under Linux 2.4.20.
I think that I may be missing an obvious configuration step.
I have pimd running on several machines, which are also OSPF routers. I have set up some default routes for multicast addresses, just to stop the networking code complaining, though obviously these are not on all interfaces.
A <-> B <-> C <-> D
Output from pimd -d all, shows that all of the machines are aware of each other.
However, when I use mtrace from machine A
e.g. mtrace ipmachineD 224.0.1.10
then it fails.
Similarly, with other multicast applications such as VideoLAN.
Multicast routes handled by PIM are also not shown by ip route.
Any thoughts?
I have not seen much multicast work happening on Linux for a while, since the days of Mbone.
Is this the case?
I want to run IPv4, so an IPv6 multicast solution doesn't help.
Regards
Andrew
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/