How to find the NIC Capacity / Bandwidth ?
Hi,
Any body having idea to find the NIC Capacity / BW (10 / 100 Mbps) ? Whether the interface may be eth0/eth1/ppp0 or some other. Is there any related IOCTL avialable, if so just give the linux-2.4.18 file path.
thanks,
Srikanth.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Srikanth,
: Any body having idea to find the NIC Capacity / BW (10 / 100 Mbps) ? : Whether the interface may be eth0/eth1/ppp0 or some other. Is there any : related IOCTL avialable, if so just give the linux-2.4.18 file path.
For ethernet interfaces (devices), you should be able to determine the negotiated speed with either a device specific diagnostic utility (e.g., tulip-diag), or, with recent kernels and drivers, mii-diag, mii-tool, and the preferred ethtool.
You can find the source to ethtool here:
http://freshmeat.net/projects/ethtool/?topic_id6%2C150
If this doesn't provide your answer, you may find a faster (if terser) answer from linux-net....as for determining speed of a serial link from the interface or device--I have no idea! Maybe somebody else on the list?
Best of luck,
-Martin
Signature · 5 lines
Martin A. Brown --- SecurePipe, Inc. --- [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Dear Martin,
Thanks for the quickest response.
I've downloaded ethtool-1.6.tar.gz from the freshmeat.net, and customized the "ethtool.c"
It's giving the Speed of 10Mb/s.
regards,
Srikanth.
Quoted 15 lines · Martin A. Brown
Srikanth,
: Any body having idea to find the NIC Capacity / BW (10 / 100 Mbps) ? : Whether the interface may be eth0/eth1/ppp0 or some other. Is there any : related IOCTL avialable, if so just give the linux-2.4.18 file path.
For ethernet interfaces (devices), you should be able to determine the negotiated speed with either a device specific diagnostic utility (e.g., tulip-diag), or, with recent kernels and drivers, mii-diag, mii-tool, and the preferred ethtool.
You can find the source to ethtool here:
Quoted 10 lines
If this doesn't provide your answer, you may find a faster (if terser) answer from linux-net....as for determining speed of a serial link from the interface or device--I have no idea! Maybe somebody else on the list?
Best of luck,
-Martin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/