Skip to contentSkip to conversation

quantum vs. r2q ?

LARTC openings 2 participants 2 messages May 1, 2003

lore
Share & tools
lore

openings

author
#0 lore raw

Thanks for your answer. stef.

My exmaple is not suitable.

but, On 100Mbit Ethernet Network environment.

Some class's rate can be 1Mbps.

The other class's rate can be 30Mbps

In this situation, when r2q, automatic set quantum value = 12500 (1Mbps class)
automatic set quantum value = 375000(30Mbps class) => too big!

when r2q0, automatic set quantum value = 1250 (1Mbps class)=> too small!
automatic set quantum value = 37500 (30Mbps class)

when r2q P, automatic set quantum value = 2500 (1Mbps class)
automatic set quantum value = 75000 (30Mbps class)=> too big!

Searching of r2q value is too difficult.

In above situation,
I select r2q = 50, and when I create 30Mbps class, I use quantum0000 option.
Is this right?
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿË™¨¥Šx%ŠË,S ùšŠYšŸ÷lõ¯ç–m§ÿÿ™¨¥™©ÿvÏZþy™¨¥™©ÿ–+-ŠwèþV«µÁÎY3ÿ†Ûiÿÿåj»\þŠà

#1 lore raw
Quoted 21 lines · openings

Thanks for your answer. stef.

My exmaple is not suitable.

but, On 100Mbit Ethernet Network environment.

Some class's rate can be 1Mbps.

The other class's rate can be 30Mbps

In this situation, when r2q, automatic set quantum value = 12500 (1Mbps class) automatic set quantum value = 375000(30Mbps class) => too big!

when r2q0, automatic set quantum value = 1250
(1Mbps class)=> too small! automatic set quantum value = 37500 (30Mbps class)

when r2q P, automatic set quantum value = 2500
(1Mbps class) automatic set quantum value = 75000 (30Mbps class)=> too big!

Quoted 5 lines

Searching of r2q value is too difficult.

In above situation,
I select r2q = 50, and when I create 30Mbps class, I use quantum0000 option. Is this right?

Yes. But don't worry about a wrong quantum. It's only used when 2 classes are asking for more bandwidth then the rate.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/