Skip to contentSkip to conversation

Traffic priority.

LARTC Alexandru Coseru 3 participants 5 messages May 3, 2003 – May 9, 2003

lore
Share & tools
lore
#0 lore raw

Hello..

Can somebody show me an example of how can I make prioritys for my traffic ? Like putting www & pop3 on priority 1 , ftp on priority 2 and the bulk traffic to priority 3?

I've searched at lartc.org , but I can not find something like that....

Thanks in advance....

Alex

#1 lore raw
Quoted 8 lines · Alexandru Coseru

Hello..

Can somebody show me an example of how can I make prioritys for my traffic ? Like putting www & pop3 on priority 1 , ftp on priority 2 and the bulk traffic to priority 3?

I've searched at lartc.org , but I can not find something like that....

Take a look at the wondershaper (can be found on lartc.org) and I collected some info on www.docum.org.
But what do you want do? Do you want to priorize or do you want to shape? I think it's better you shape the traffic so you can give www&pop3 70% of your link, ftp, 20% and bulk the rest.

Stef

Signature · 9 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Alexandru Coseru

I cannot shape because I have no fixed bandwith..

I mean right now my download goes with 10 kbytes/sec , an hour ago it was
around 50 kbytes/sec...
I have a special kind of deal with my ISP... it all depends on how loaded
my ISP is...

So , I can't put 70% for www , cause I don't know what 100% means for me...

I hope you can understand me....

Thanks

Alex

----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Alexandru Coseru" <[email protected]>; <[email protected]>
Sent: Saturday, May 03, 2003 1:00 PM
Subject: Re: [LARTC] Traffic priority.

Quoted 4 lines · Alexandru Coseru
Quoted 3 lines

Hello..

Can somebody show me an example of how can I make prioritys for my

traffic

Quoted 1 line
Quoted 1 line

? Like putting www & pop3 on priority 1 , ftp on priority 2 and the

bulk

Quoted 5 lines
Quoted 4 lines

traffic to priority 3?

I've searched at lartc.org , but I can not find something like that....

Take a look at the wondershaper (can be found on lartc.org) and I

collected

Quoted 2 lines

some info on www.docum.org.
But what do you want do? Do you want to priorize or do you want to shape?

I

Quoted 1 line

think it's better you shape the traffic so you can give www&pop3 70% of

your

Quoted 12 lines

link, ftp, 20% and bulk the rest.

Stef

--

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net

Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Alexandru Coseru
Quoted 1 line · Alexandru Coseru

I cannot shape because I have no fixed bandwith..

You still can shape if you don't have a fixed bandwidth.

Quoted 4 lines

I mean right now my download goes with 10 kbytes/sec , an hour ago it was
around 50 kbytes/sec...
I have a special kind of deal with my ISP... it all depends on how loaded
my ISP is...

Same for me.

Quoted 3 lines

So , I can't put 70% for www , cause I don't know what 100% means for me...

I hope you can understand me....

Yes.
But still it can be done. You can create a setup for 10kb/s, but if there is more bandwidth, it will use more. But the 70% for www will always be valid. It is better if you know your maximum speed, but if you don't, you still can shape.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to Alexandru Coseru
Quoted 1 line
Quoted 1 line

So , I can't put 70% for www , cause I don't know what 100% means for

me...

Quoted 4 lines
Quoted 2 lines

I hope you can understand me....

Yes.
But still it can be done. You can create a setup for 10kb/s, but if there

is

Quoted 1 line

more bandwidth, it will use more. But the 70% for www will always be

valid.

Quoted 1 line

It is better if you know your maximum speed, but if you don't, you still

can

Quoted 1 line

shape.

This is new to me. Could you explain to me with a small example?

Kjell

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/